综合欧美一区二区三区,免费?Ⅴ中文字幕无码久久,人妻精品动漫H无码网站,岛国精品无码在线观看,亚洲一区二区日韩,欧美一区二区放荡人妇,无码人妻精品一区二区三区66,中文视频无码一区二区三区视频

2024

2024

  • Record 349 of

    Title:Design of Optical-mechanical System of Catadioptric Aerial Mapping Camera Based on Secondary Mirror Image Motion Compensation
    Author Full Names:Zhang, Hongwei(1); Qu, Rui(1); Chen, Weining(1); Yang, Hongtao(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Aerial surveying and mapping is an important technical means of civil/military surveying and mapping,which can quickly obtain large-scale and high-precision scale mapping of the target area in a short period of time,and accurately obtain coordinate information of the target plane and elevation information on the map. The acquired information plays an important supporting role in digital city construction,land resources survey,military strategic planning,etc. With the development of aerial surveying and mapping technology,the requirements for aerial mapping cameras have been further improved. It is required that aerial mapping cameras can achieve wide width,high precision and large scale mapping. In order to meet the above requirements,the aerial mapping camera adopts scan imaging mode,but this imaging mechanism will introduce forward/scan image motion,which will affect the image quality. In order to satisfy the image stabilization accuracy of the aerial mapping camera,it is necessary to compensate the image motions. Therefore,a catadioptric aerial mapping camera based on secondary mirror image motion compensation is designed in this paper. Aiming at the dynamic image motion problem of the aerial mapping camera in the process of ground swing imaging,the vector aberration theory for a two-mirror telescopic systems is adopted. The secondary mirror is used as the image motion compensation element, and the comprehensive image motion compensation of the aerial mapping camera is realized through the secondary mirror multi-dimensional motion. However,in the process of compensating the image motion,the secondary mirror will be eccentric and inclined,which will cause the secondary mirror to be off-axis and affect the image quality. Therefore,a misalignment optical system model is established to study the relationship between the deviation vector of the secondary mirror field and the misalignment of the secondary mirror field,and the influence of the secondary mirror motion on the image quality is analyzed. Meanwhile,a design example of the optical-mechanical system of the catadioptric aerial mapping camera based on the secondary mirror image motion compensation is given. The effective focal length of the optical system is 450 mm,and the working spectrum is 435~900 nm. The field of view of the optical system is 4.17×3.13,and the F-number is 4.2. In the design process,the optical-mechanical system of aerial mapping camera adopts non-thermal design to adapt to the working environment of ?40 ℃~60 ℃. In order to verify the image motion compensation ability of multi-dimensional motion of the optical element,an experimental platform is built to conduct laboratory imaging tests and field imaging tests on the aerial mapping camera. The laboratory imaging test results show that the dynamic resolution of the aerial mapping camera using the image motion compensation technology can reach 74 lp/mm,and the image motion compensation accuracy is better than 0.5 pixels,which meets the design expectation. In addition,the field imaging test results show that compared with disable image motion compensation function,the aerial survey camera with enable image motion compensation function can acquire sharp edges,clear images,and image quality can meet the expected requirements. Therefore,the camera has the advantages of high accuracy of image motion compensation,compact volume and high reliability,which lays a theoretical foundation for the direction of light and small,high precision and large scale mapping. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Aircraft Optical Imaging and Monitoring and Measurement Technology Laboratory, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:2
    Article Number:0222001
    DOI Link:10.3788/gzxb20245302.0222001
    數據庫ID(收錄號):20240715561717
  • Record 350 of

    Title:Optimization Design of Large Aperture Curved Prism Bonding Based on Finite Element Analysis
    Author Full Names:Feng, Jun(1,2); Li, Siyuan(1); Wang, Feicheng(1,2); Chen, Wencong(1,2); Tian, Feifei(1,2); Jia, Xinyin(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Aiming at the working conditions and performance requirements of large-diameter curved prisms with high face shape precision,an optimized design approach is proposed for bonding such prisms while considering the adhesive curing shrinkage stress. Based on this approach,the bonding process for large-diameter curved prisms is successfully optimized. Firstly,the finite element differential equation for the shrinkage stress during glue curing is derived based on the non-free curing model of the glue. Secondly,by applying the principles of support structure design and flexible structure design theory,a meticulously devised circular flexible bonding structure was created. The topology of the frame structure was optimized with flexibility as the primary objective while adhering to structural weight constraints,resulting in an impressive lightweight rate of 55.79%. Subsequently,a simulation and analysis model was developed to investigate the impact of adhesive curing shrinkage on mirror surface shape using the temperature loading method. The response surface model for the colloid parameters' equivalent gel contraction force was established,achieving a goodness of fit of 97.56%. It was found that the equivalent gel contraction force increased with the increase of colloid contraction rate and thickness. Additionally,the equivalent gel contraction force and the area of colloid spot exhibited different monotonous increasing and decreasing trends under varying gel contraction rates. The degree of influence of colloid contraction rate on the equivalent gel contraction force was found to be the largest,while the area of colloid spot had the least influence on the equivalent gel contraction force. The optimized parameters for the colloid were determined to be 9 mm×23 mm×0.1 mm. The study investigated the influence of adhesive type,gel parameters,and bonding quantity on the surface shape of curved prism components. The results obtained from the surface shape simulation analysis of curved prisms using three kinds of epoxy adhesives(3M-2216,Milbond,and GHJ-01)under the same conditions were compared in terms of relevant properties of adhesive materials. The influence of surface shapes before and after curing was also examined to compare the performance of the adhesives. It was determined that the 3M-2216 adhesive exhibited optimum performance among the three kinds of adhesives. With the increase in the number of bonds,the deformation value of the front and rear mirrors shows a trend of decreasing and then increasing. The maximum stress value shows a fluctuating downward trend,while the average stress value shows a trend of decreasing and then slowly increasing. When bonded with 6 glue dots,the deformation of the upper and lower dome positions can be precisely restrained,so that the maximum deformation is concentrated in the center of the mirror. The deformation value and stress value are smaller. In summary,an optimized solution for high face shape accuracy is obtained by choosing 3m-2216 epoxy adhesive,designing arc-shaped glue spots and their flexible bonding structure. Under these conditions,with 6 glue spots on each side and a homogeneous distribution of gluing,it was found that the PV value for face shape accuracy of the curved prism's front mirror face is 2.78 nm with an RMS value of 0.53 nm;for its back mirror face,it is 1.58 nm with an RMS value of 0.31 nm which is 98% lower than that of the initial structure. Compared to the initial structure,wavefront error caused by adhesive curing has been reduced by 98.89%. Additionally,environmental adaptability was analyzed using the finite element method: Z-direction self-weight significantly impacts curved prism assembly followed by X-direction;Y-direction has the least effect. The maximum deformation observed in the assembly is at its upper surface center(67.6 nm),while the maximum stress value(0.18 MPa)is found on the bonding surface of the bonding ring. For front mirror surface shape accuracy:X-direction self-weight plays a major influence with PV value being 16.3 nm and RMS value of 3.61 nm;whereas for rear mirror surface,Z-direction self-weight plays a dominant role with PV value of 29.3 nm and RMS value of 5.34 nm. The thermal deformation and thermal stress reach their maximum values when subjected to a uniform temperature rise of 4 ℃ on gel material. As the temperature gradient increases,both thermal deformation and thermal stress initially decrease before increasing again. Among different temperature gradients tested,a rise in temperature gradient by 3 ℃ shows minimal impact on curved prism assembly,which validates its structural design's rationality. After implementing an optimized gluing scheme,the face shape accuracy for curved prism mirrors is less than 0.059λ in terms of PV value,and less than 0.012λ in terms of RMS value. This proposed gluing optimization scheme considers shrinkage stress during the curing process,meeting high-precision optical system requirements. The findings from this study can serve as a reference for optimizing high-face shape precision gluing schemes and support structure designs for large-diameter curved prisms. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:53
    Issue:11
    Article Number:1122002
    DOI Link:10.3788/gzxb20245311.1122002
    數據庫ID(收錄號):20245117558554
  • Record 351 of

    Title:Fourier ptychographic reconstruction with denoising diffusion probabilistic models
    Author Full Names:Wu, Kai(1,2); Pan, An(1); Gao, Wei(1)
    Source Title:Optics and Laser Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Fourier ptychographic microscopy (FPM) is a promising computational imaging technique that can bypass the diffraction limit of the objective lens and achieve high-resolution, wide field-of-view imaging. The FPM setups firstly capture a series of low-resolution (LR) intensity images by angle-varied illumination and then reconstruction algorithms recover the high-resolution (HR) complex-valued object from the LR measurements. The image acquisition process commonly introduces noise, ultimately leading to degradation in the quality of the reconstruction results. In this paper, we report a noise-robust Fourier ptychographic reconstruction method that generates the HR complex-valued object estimation using the image priors specified by denoising diffusion probabilistic models (DDPM). First, the initial estimation of the HR complex-valued object is matched with an intermediate state in the Markov chain defined by DDPM. Then, the noisy initial solution is iteratively updated to a high-quality reconstruction result in the reverse process of DDPM and gradient descent correction is incorporated to enforce data consistency with the LR measurements. The proposed method integrates DDPM specified image priors and gradient descent correction, achieving solutions with less noise-related artifacts and high fidelity for HR complex-valued object estimation in Fourier ptychographic reconstruction. We apply the proposed method on both synthetic and real captured data. The experimental results show that our method can efficiently suppress the impact of noise and improve reconstruction results quality. ? 2024 Elsevier Ltd
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:176
    Article Number:111016
    DOI Link:10.1016/j.optlastec.2024.111016
    數據庫ID(收錄號):20241715963426
  • Record 352 of

    Title:Temperature Measurement Method for Small Target Medium-Wave Infrared Spectral Radiation Based on Distance Correction
    Author Full Names:Li, Wen-Kai(1,2); Zhou, Liang(1); Liu, Zhao-Hui(1); Gui, Kai(1); Liu, Kai(1); Li, Zhi-Guo(1); Xie, Mei-Lin(1)
    Source Title:Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:For long-distance space targets moving at high speeds, temperature is one of the important parameters to characterize their working state and performance. Accurately obtaining the temperature of the target has an important reference value for judging its motion state and predicting its situation development. At present, the commonly used processing method of surface target or point target is no longer applicable to the measurement of the radiation characteristics of small targets. At the same time, spectral detection increases the distinguishable information of the target in the wavelength dimension, which can accurately obtain the distribution of the target energy with wavelength, providing a possibility for the inversion of the target temperature, and has great application potential. The slitless spectrometer can reduce the requirements for tracking and stabilization accuracy of space targets, has the characteristics of simple structure, high frame rate and fast response speed, and has high application value in astronomical observation and spacecraft observation. In this paper, we analyzed the spectral calibration model of target infrared radiation characteristic measurement and determined the main parameters in the linear response model of infrared detector pixels. In order to reduce the influence of imaging distance on temperature measurement accuracy, we proposed a target temperature inversion model based on distance correction. The improved temperature measurement accuracy meets the accuracy requirements in practical engineering applications and greatly affects infrared radiation spectrum temperature measurement. Certain guiding significance. ? 2024 Science Press. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:44
    Issue:4
    Start Page:1158-1164
    DOI Link:10.3964/j.issn.1000-0593(2024)04-1158-07
    數據庫ID(收錄號):20241515866101
  • Record 353 of

    Title:Laser Center Extraction Method of Circular Linear Structure Profile Measurement Based on Cluster Segmentation
    Author Full Names:Yan, Xingxu(1); Du, Hubing(1); Feng, Leijie(1); Li, Yanjie(1); Jia, Jinge(2); Zhang, Gaopeng(3)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Hole parts, such as bearings, cylinders, hydraulic cylinders, and artillery body tubes, are important to the field of aviation, spaceflight, auto, machine tool and heavy equipment manufacture industry. However, the inspection of inner surface quality of this kind of parts, especially deep hole inner surface, remains a difficult problem in the manufacturing field. More specifically, the difficulty of inspection system mainly lies in two aspects:firstly, the workspace is narrow, making it difficult to effectively use the existing inspection technologies;secondly, due to the limitations of the non-open space of the inner surface, it is easy to form blind zone during the task of measurement. To satisfied with the increasing requirements of quality inspection in above fields, some scholars have applied the optical method into the measurement system of hole parts because of its advantage of high accuracy, high robustness, rapid speed, non-contact, and low cost. However, when measuring inner surface of hole parts, the optical method often presents the problem of a limited or occluded field of view for the characteristics of hole parts. Due to the problem of occlusion, the well-known fringe projection profilometry cannot projected the fringe pattern to the inner surface and the desired deformed fringe pattern cannot be captured by a camera accordingly. So, circular structured light 3D measurement technology has been extensively employed to inspect accuracy of the hole parts, which is an active vision measurement technology based on the laser triangulation principle. Many works have been done to enhance the performance of circular structured light technique. However, occlusions are problematic because the light source and camera are placed on the same side of the measured object in the exiting technique. Additionally, the technique may be disturbed by speckle noise when metal surface is measured. Consequently, for structured light measurement technology, it is necessary to develop an efficient preprocess method to eliminate the disturbance to the most extent because the performance of the technology largely depends on high quality images. But this problem remains unsolved so far to our knowledge. In the work, the circular linear structure profile measurement method is proposed to inspect the quality of internal surfaces of hole parts. In our method, the light source and the image sensor are arranged on either side of the object to be measured to get a clear view during data acquisition. However, the proposed circular structure profile measurement technique is seriously affected by the quality of the extraction of the center of the laser center when a metal surface is measured. Concerned that removing the image of the light source used in the setup and laser speckle effect is vital to center extraction of circular structured light, in this paper, a clustered segmentation-based center extraction method is developed. The process of our method is as follows:The maximum inter class variance(OTSU)method is firstly used to adaptively segment the captured laser image into two parts:background and target image;then, the clustering method is used to separate the laser light source image and the laser speckle in the captured laser image;finally, sub-pixel laser center extraction is realized with help of the well-known Steger algorithm. Both simulation and experiment validate the correctness of the proposed method. The experimental results show that the proposed method can well suppress the influence of the laser light source image and the laser speckle during the extraction of the center of the laser center when compared with the typical filtering methods, such as median filtering. In addition, the proposed method can fulfil the task of center extraction efficiently, stably, and reliably. Therefore, it provides an effective way of extraction of laser center for three-dimensional contour measurement of deep hole parts. In the future work, we will focus on the development of accurate calibration method to convert 2D light stripes information into 3D coordinate information. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) School of Mechanical and Electrical Engineering, Xi'an University of Technology, Xi'an; 710021, China; (2) Xi'an Future Intelligent Manufacturing Digital Technology Co., Ltd., Xi'an; 710000, China; (3) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:11
    Article Number:1112004
    DOI Link:10.3788/gzxb20245311.1112004
    數據庫ID(收錄號):20245117548489
  • Record 354 of

    Title:Blind deep-learning based preprocessing method for Fourier ptychographic microscopy
    Author Full Names:Wu, Kai(1,2); Pan, An(1); Sun, Zhonghan(1); Shi, Yinxia(1,2); Gao, Wei(1)
    Source Title:Optics and Laser Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Fourier ptychographic microscopy (FPM) is a technique for tackling the trade-off between the resolution and the imaging field of view by combining the techniques from aperture synthesis and phase retrieval to estimate the complex object from a series of low-resolution intensity images captured under angle-varied illumination. The captured images are commonly corrupted by multiple noise, leading to the degradation of the reconstructed image quality. Typically speaking, the noise model and noise level of the experimental images are unknown, and the traditional image denoising methods have limited effect. In this paper we model the FPM forward imaging process corrupted by noise and divide the noise in the captured images into two parts: the signal-dependent part and the signal-independent part. Based on the noise model we propose a novel blind deep-learning based Fourier ptychographic microscopy preprocessing method, termed BDFP, for removing these two components of noise. First, from a portion of the captured low-resolution images, a set of blocks corresponding to the smooth area of the object are extracted to model signal-independent noise. Second, under the assumption that the signal-dependent noise follows a Poisson distribution, we add Poisson noise and signal-independent noise blocks to clean images to form a paired training dataset, which is then used for training a deep convolutional neural network (CNN) model to reduce both signal-dependent noise and signal-independent noise. The proposed blind preprocessing method, combining with typical FPM reconstruction algorithms, is tested on simulated data and experimental images. Experimental results show that our preprocessing method can significantly reduce the noise in the captured images and bring about effective improvements in reconstructed image quality. ? 2023 Elsevier Ltd
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:169
    Article Number:110140
    DOI Link:10.1016/j.optlastec.2023.110140
    數據庫ID(收錄號):20234014830596
  • Record 355 of

    Title:Dual Optical Target Recognition Method for Collimated Images Based on BLOB Region and Edge Feature Analysis
    Author Full Names:He, Wenxuan(1,2); Wang, Zhengzhou(1); Wei, Jitong(1); Wang, Li(1); Yi, Dongchi(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:In order to solve the problem that the collimated target recognition algorithm of optical path docking cannot distinguish the adhesive state of double targets,a new method of collimated image dual optical target recognition based on Binary Large Object(BLOB)region feature analysis is proposed. There are two optical targets in the optical alignment image,that is,the simulated optical target and the main laser target. In the initial beam control stage,the positions of the two optical targets are random and uncertain,and there is a possibility of the two optical targets sticking together,which causes great difficulties in beam control. Therefore,optical path alignment needs to solve the image recognition problem in two cases:1)In the initial beam control stage,when the main laser beam and the analog beam are just introduced,the adhesion recognition algorithm needs to be used to identify the adhesion state of the two optical targets. If the two optical targets are in the adhesion state,the two targets need to be completely separated by adjusting the 2D frame BM6XY motor;2) In the case of two optical targets completely separated,it is necessary to distinguish between the analog light target and main laser target in the two optical targets. Firstly,the binary image is processed by digital morphology to calculate the area,center Cxy,axis length lenxy and region Reginxy,of each BLOB region in the whole image. Secondly,the number of valid BLOB regions vblobcount is counted,and the distance between the two maximum connected domains dir is calculated. When vblobcount>1 and dir>100,the collimation image is the completely separated double target image,otherwise it is the adhered image. Then,for the completely separated dual-target image,the number of BLOBs located in the two largest BLOB regions with the center of each BLOB region is counted. The small number of candidate BLOB regions is the main laser target,and the large number of candidate BLOB regions is the analog light target. Finally,for the adhered image,when dir ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100039, China
    Publication Year:2024
    Volume:53
    Issue:2
    Article Number:0210001
    DOI Link:10.3788/gzxb20245302.0210001
    數據庫ID(收錄號):20240715561765
  • Record 356 of

    Title:A design of compact plasmonic lens consisting of high index dielectric gratings and metal nano-film
    Author Full Names:Jia, Sen(1); Wang, Xianhua(1); Zhou, Libing(2)
    Source Title:Optics Communications
    Language:English
    Document Type:Journal article (JA)
    Abstract:In this paper, a hybrid ultra-thin planar subwavelength focusing structure consisting of a high refractive index dielectric grating and a nano metal film was designed. The thickness of this structure is only 200 nm. Surface plasmon polaritons (SPPs) were excited from the nano metal film, propagated along the metal-air interface, and were then converted into a radiation field by the dielectric grating, forming a focused spot in free space. By adjusting the grating position and width parameters, the shape of the focused optical field could be controlled. The simulation results showed that, under 532 nm light irradiation, the lens could produce a 270 nm (full width at half-maximum, FWHM) spot size at a focal length of 2.46λ. Moreover, under the illumination of 633 nm and 780 nm light, the designed lenses were found to produce focal spot sizes of 304 nm (0.48λ) and 364 nm (0.47λ), respectively, which were smaller than the diffraction limit. The simplicity of this plasmonic lens design, coupled with its reduced thickness and minimal absorption loss, offered significant advantages in terms of cost-effectiveness and ease of fabrication. ? 2024 Elsevier B.V.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) School of Physics and Information, Shaanxi University of Science and Technology, Xi'an; 710021, China
    Publication Year:2024
    Volume:570
    Article Number:130928
    DOI Link:10.1016/j.optcom.2024.130928
    數據庫ID(收錄號):20243216819587
  • Record 357 of

    Title:Tracking control of flexible link manipulator with joint space constraints
    Author Full Names:Jing, Feng(1,2); Ma, Caiwen(1,2); Cao, Yu(1); Xie, Meilin(1); Wang, Fan(1); Liu, Peng(1); Fan, Xiao(1)
    Source Title:Journal of Physics: Conference Series
    Language:English
    Document Type:Conference article (CA)
    Conference Title:2024 7th International Conference on Intelligent Manufacturing and Automation, IMA 2024
    Conference Date:January 12, 2024 - January 14, 2024
    Conference Location:Virtual, Online, China
    Abstract:A controller design with system uncertainties, external disturbances, and joint space constraints for a flexible link manipulator (FLM) is presented in this paper. To overcome the lumped disturbance and ensure that the joint space constraints are not violated, a finite-time extended state observer (ESO) and a barrier Lyapunov function are constructed. Using Lyapunov's theory, the error of the system is proved to be semi-globally ultimately uniformly bounded without violating the constraints. Finally, the rationality of the proposed methodology is verified by numerical simulation. ? Published under licence by IOP Publishing Ltd.
    Affiliations:(1) Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:2787
    Issue:1
    Article Number:012043
    DOI Link:10.1088/1742-6596/2787/1/012043
    數據庫ID(收錄號):20242816660786
  • Record 358 of

    Title:Splitting rules of the channeled modulation polarization imaging technology for different polarization detection requirements
    Author Full Names:Zhang, Ning(1); Zhang, Yunyao(2); Li, Siyaun(1)
    Source Title:Proceedings of SPIE - The International Society for Optical Engineering
    Language:English
    Document Type:Conference article (CA)
    Conference Title:2024 Conference on Spectral Technology and Applications, CSTA 2024
    Conference Date:May 9, 2024 - May 11, 2024
    Conference Location:Dalian, China
    Conference Sponsor:Chinese Society for Optical Engineering
    Abstract:Channeled modulation polarization imaging technology can obtain full polarization information of targets through a single frame of image, with advantages such as compact, low cost, and without electric rotating accessories. It has important application value in remote sensing, biomedical, national defense, and so on. The key point of channeled modulation polarization imaging technology is to modulate the four Stokes parameters that characterize polarization to different carried frequencies through amplitude modulation, and then use the frequency domain to separate the four two-dimensional Stokes parameters. Different channels are intercepted by a bandpass filter and subjected to inverse Fourier transform, which can achieve four two-dimensional distribution pictures of the Stokes parameters. Interference is the core of this technology, which is achieved through birefringent crystals or spectroscopic interferometers. After splitting, interference occurs in the focal plane, generating carrier frequency. However, a serious problem has been troubling researchers in this field, which is how to design birefringent crystals to achieve amplitude modulation of Stokes parameters. The amplitude of the interference fringes of the beams needs to be divided corresponds one-to-one with the Stokes parameter after interference. The current spectroscopic design mainly relies on experience and luck, lacking unified standards, which will affect the efficiency of system design. To solve this problem, relying on the representation of the electric field vector of light, the mathematical expression of Stokes parameters and the corresponding relationship with the spectral results are analyzed in reverse. Then, based on the physical meaning of Stokes parameters, phase modulation is used to achieve the representation of certain parameters for the sum of light intensities and the representation of certain parameters for the difference in light intensities. Ultimately, a correspondence is formed between different spectroscopic results and the detected polarization parameters and proposed modulation criteria for channeled modulation by linking the physical meaning and mathematical model of Stokes parameters. On the one hand, this study is beneficial for the targeted design of channeled modulation polarization imaging technology in different application scenarios for different parameter detection requirements, and on the other hand, it can guide the design of optical systems for different spectral requirements in birefringent crystal design, making the design of this technology more standardized. ? 2024 SPIE.
    Affiliations:(1) Key Laboratory of Spectral Imaging Technology, Xi'an Institute of Optics and Precision Mechanics of Cas, Xi'an; 710119, China; (2) College of Information Science and Technology, Northwest University, Xi'an; 710126, China
    Publication Year:2024
    Volume:13283
    Article Number:1328325
    DOI Link:10.1117/12.3036652
    數據庫ID(收錄號):20245217584034
  • Record 359 of

    Title:Observation of Superoscillation Superlattices
    Author Full Names:Ma, Xin(1); Zhang, Hao(1); Wei, Wenjun(1); Tai, Yuping(1); Li, Xinzhong(1,2,3); Shen, Yijie(4,5)
    Source Title:arXiv
    Language:English
    Document Type:Preprint (PP)
    Abstract:Superoscillation (SO) wavefunctions, that locally oscillate much faster than its fastest Fourier component, in light waves have enhanced optical technologies beyond diffraction limits, but never been controlled into 2D periodic lattices. Here, we report the 2D superoscillation lattices (SOL) with controlled symmetries, where the local wavevector can be ~700 times larger than the global maximal wavevector (k0) in a localized region ~100 times smaller than the global minimal wavelength (λ0). We also demonstrate the superoscillation superlattices (SOSL) as twisted bilayer Moirépatterns of two SOL, akin to the magic angle tuning in advanced twistronics, we can continually tune the on-demand SO with local maximal wavevector in a range of 450k0–700k0 and with ~ λ0/100–λ0/1000. The twistronic SOSL will advance optical imaging and metrology into extreme higher-dimensional superresolution.MSC Codes 78 Copyright ? 2024, The Authors. All rights reserved.
    Affiliations:(1) School of Chemistry and Chemical Engineering, School of Physics and Engineering, Henan University of Science and Technology, Luoyang; 471023, China; (2) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'An; 710119, China; (3) Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology, Luoyang; 471023, China; (4) Centre for Disruptive Photonic Technologies, School of Physical and Mathematical Sciences, The Photonics Institute, Nanyang Technological University, Singapore; 637371, Singapore; (5) School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore; 639798, Singapore
    Publication Year:2024
    DOI Link:10.48550/arXiv.2409.19565
    數據庫ID(收錄號):20240426023
  • Record 360 of

    Title:High Modulation Depth Terahertz Modulator Based on Side-polished Terahertz Fiber
    Author Full Names:Luo, Zhenyang(1); Tian, Ziping(1); Zhang, Zilong(1); Wei, Longxiang(1); Xie, Manyan(1); Chen, Bingyu(1); Wang, Xingfu(2); Peng, Gangding(3); Kong, Depeng(4); Wei, Yuming(5); Yang, Tiefeng(5); Lu, Huihui(5); Guan, Heyuan(5)
    Source Title:Journal of Lightwave Technology
    Language:English
    Document Type:Article in Press
    Abstract:High modulation depth fiber-based modulators working at terahertz (THz) wavelength are of paramount importance for the application of THz communication technology by taking advantages of the low loss, high interference resistance and strong adaptability THz fiber network. Here, we demonstrate a THz modulator based on side-polished THz fiber combined with GaAs film/Au-nanoparticles (Au-Nps). The Au-Nps and the remaining thickness of the side-polishing are careful designed to achieve target resonance wavelengths. The side-polishing region of fiber provides a flat platform for integrating nanostructures to enhanced light-material interactions which greatly enhances the modulation performance. The experimental results show that this new fiber modulator can achieve the THz wave amplitude modulation under a relatively low irradiation of an external 808 nm laser, with a tunable frequency range of 0.366-1.093 THz and a maximum modulation depth of 99.24%. Besides, resonance frequency can be adjusted by changing the remaining thickness of the device. Moreover, the area of this modulator is only 9 mm2 which can be easily integrated into THz systems. Therefore, we believe our work will contribute to the developments of high-performance fiber-based THz modulator for applications in THz communication system. ? 1983-2012 IEEE.
    Affiliations:(1) Jinan University, Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, Guangzhou; 510632, China; (2) South China Normal University, Guangdong Engineering Research Center of Optoelectronic Functional Materials and Devices, School of Semiconductor Science and Technology, Foshan; 528225, China; (3) University of New South Wales, School of Electrical Engineering and Telecommunications, Sydney; NSW; 2052, Australia; (4) Chinese Academy of Sciences, Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Shaanxi, Xi'an; 710119, China; (5) Jinan University, Key Laboratory of Optoelectronic Information, Sensing Technologies of Guangdong Higher Education Institutes, Guangzhou; 510632, China
    Publication Year:2024
    DOI Link:10.1109/JLT.2024.3509575
    數據庫ID(收錄號):20245017522377
91看黄片| 亚洲性爱网站| 北条麻妃在线视频| 性v天堂| 亚洲中文字幕在线观看| 性欧美精品| 亚洲三区在线观看| 丰满人妻熟女aⅴ一区| 国产精品五区| 精品久久久久久久久久| 国产精品51| 国产高清无码在线观看| 国产女人18毛片水真多1KT∧| 伊人久久亚洲| 熟女av网址| 粗大的内捧猛烈进出在线视频| 久久88| 欧美操逼精品| 国产高清精品软件| 影音先锋女人aV鲁色资源网站| 九色在线观看| 国内精品免费视频| 国精品无码一区二区三区| 一级Av片| 91蜜桃臀久久一区二区| 青青草视频在线免费观看| 国产精品电影在线观看| 欧美日韩综合| 国产精品国产三级国产普通话99 | 国产性爱网| 日韩精品欧美在线| 国产毛片毛片毛片| 国产成人免费| 人人射人人操| 91亚洲国产成人精品一区二三| 黄色91视频| 亚洲黄色三级视频| 秋霞伦理视频| 91电影| 无码精品人妻一二三区红粉影视| 无码精品久久久久久亚洲| 午夜精品久久久久久| 91免费看视频| 人人摸人人上人人| Av天天有| 日本中文A片理论片在线观看| 亚洲人人操| 欧美亚洲中文字幕| 在线观看中文字幕| 99久久人妻无码精品系列| 亚洲国产激情乱伦无码| 精品国产乱码久久久久久果冻| 91福利导航| 99精品一区| 精品人伦一区二区色婷婷| 久久国产一区二区| 人人干人人摸| 狠狠躁18三区二区一区| 亚洲欧美综合视频| 国产综合一区无码| 亚洲性爱视频免费看| 日韩亚洲一区二区| 日本电影一区二区三区| 精品久久久久久久久亚洲| 啪啪视频com| 小泽玛利亚在线观看| 91人人爽人人爽人人精88V| 欧美黄色一级视频| 国产AV一区二区三区| 精品人妻视频日韩| 波多野结衣中文字幕久久| 黄色美女网站| 日韩精品第一页| 日韩午夜| 国产欧美一区二区三区在线看蜜臂| 在线免费观看黄网站| 国产va精品免费观看| 欧美午夜影院| 91亚洲视频| 18禁免费网站| 一级a一级a爱片免费视频| 国产一区二区在线视频| 黄色无码网站| 国产白浆视频| 人人操人人下-页| 日日躁夜夜躁狠狠躁aⅴ蜜| 国产精品电影在线观看| 久久无码影视| 久久精品国产一区二区电影| 波多野结av衣东京热无码专区| 一级毛片AAAAAA免费看99| 人妻互换一二三区免费| 嫩草网站在线观看| 日本三级片一区二区三区| 国产亚洲色婷婷久久99精品91·| 五月婷婷大香蕉| 国产第8页| 朝桐光一区二区三区| 18片毛片60分钟免费| 亚洲免费AV一区二区| 少妇无套内谢久久久久| 青青青国产在线| 熟女天堂| 亚洲AV午夜精品无码专区在线| 日日插日日操| 国产做a爰片毛片A片美国| 亚洲一区av| 成人免费观看网站| 无码视频在线看| 黄片一区| 精品日韩久久| 精品无码一| 18禁无遮挡网站| 亚洲欧美一区二区三区不卡| 国产一级特黄大片色| 污网站免费| 日韩人妻系列| 色无码视频| 亚洲乱码国产乱码精品天美传媒| 亚洲AV无码成人精品区明星蜜乳| 亚洲国产精品无码久久久久久久久| 日韩欧美在线播放| 久久青草视频| 激淫少妇被插视频在线观看| 综合网久久| 国产精品99久久久久久动医院| 日韩AV导航| 国产乱了高清露脸对白| 亚洲免费人妻精品视频| 精品日韩在线| 国产一区二区三区四区| 97精品人人妻人人| 天堂AV国产一区二区熟女人妻| 一级做a视频| 狠狠人妻久久久久久综合| 一级片在线播放| 被体育老师抱着c到高潮| 丁香五月天色婷婷| 免费一级做a爰片久久毛片潮| 欧美激情一区二区三区| 中文字幕强奸Av| 欧美交换配乱吟粗大25P| 国产精品嫩草影院CCm| 91精品国产| 国产无套白浆一区二区三区| 日韩无码一级| 国产成人精品一区二区三区在线 | av天堂精品| 91网站在线播放| 高清无码免费观看| 日韩一级大片| 日韩极品视频| 久久久精品亚洲| 色男人色天堂| 99久久婷婷国产综合精品电影| 曰批全过程120分钟免费视频| 国产精品99久久| 亚洲免费人妻视频| 国产精品原创| 亚洲欧美动漫| 97久久精品| 亚洲综合区| 琪琪午夜福利| 天天日天天插| 久久理论片| 色欲久久久| 亚洲一级电影| 国产午夜精品无码一区二区| 亚洲AV永久无码精品视色影视| 欧美一区二区在线观看视频| 日韩精品在线视频| 精品不卡| 狂野欧美性猛交免费视频| 亚州人妻| 国产69精品久久久久孕妇大杂乱| 韩国无码在线| 国产精品久久久久久无码日本蜜乳| 亚洲专区一区| 一本一道久久综合狠狠躁牛牛影视 | 亚洲AV怡红院| 波多野42部无码喷潮在线| 91精品欧美| 午夜激情视频在线| FREEZEFRAME丰满少妇| 无码人妻精品一区| 粉嫩aⅴ一区二区三区四区五区| 911精品国产一区二区在线| 欧美第一色| 一起草无码在线| 国产无码毛片| 国产精品美女久久久久AV超清| 一本色道DVD中文字幕蜜桃视频| 91精品国产91久久久无码| 国产高清黄片| 精品人妻码一区二区三区红楼视频| 亚洲视频入口| 国产视频一区在线| 伊人色色| 天天燥日日燥| 黄色视频草草| 国产精品福利在线观看| 91丨九色丨农村老熟女按摩| 欧美色图第一页| 大香蕉国产精品| 亚洲黄色大片| 超碰蜜桃| 久久九九性免费视频| 人妻超碰| 国产视频二区| 麻豆啪啪| 国产日韩视频在线观看| 日本不卡久久| 国内盗摄国产盗摄av| 人人看人人摸| a在线视频| 欧美在线中文字幕| 黄色无码| 中文在线一区二区三区| 欧美日韩视频| 成人精品| 久久九九视频| 中文字幕视频一区| 大鸡巴网站| 五月婷婷国产| 国产成人精品水| 亚洲熟人妇一区二区三区| 日本免费久久| 国产精品九九| 超碰毛片| 久久久久久久亚洲| 国产精品久久国产精品99无码| 国产精品制服诱惑| 四虎在线观看| 午夜秋霞无码鲁丝A片一级| 特级黄色网站| 自拍偷拍欧美亚洲| 免费无码性爱视频| 产国传媒91一区久久无码| 精品亚洲AV无码| 苍井空无码在线观看| 黄色片网站在线观看| 欧美大成色www永久网站婷| 久久99精品国产麻豆婷婷洗澡| 成人AV一区二区三区无码金桔| 中文字幕一区二区三区| 欧洲激情网| 在线看黄色网站| 在线免费毛片| jazzjazz国产精品麻豆| 精品国产网站| 国产精品资源| 在线免费观看亚洲视频| 怍爱视频| 欧美一区二区丁香五月天激情| 爆乳一区二区| 久久久久国产精品免费免费搜索 | 国产免费AV片| 亚洲高清无码一区| 成年网站在线观看| 99精品国产一区二区| 无码高清视频| 最新国产精品视频| 国产不卡在线| 国产美女一级A片免费| 国产99在线视频| 制服丝袜亚洲无码| 亚洲中文字幕在线观看| 日本一区二区不卡在线| 亚洲丰满少妇在线播放| 欧美三级片在线观看| 日本a级毛不卡| 欧美日本亚洲| 日本三级视频在线| 在线观看黄色av| 亚洲精品动漫| 操逼免费| 91久久精品国产91性色tv| 在线观看a v| 久久精品婷婷| 99精品欧美一区二区三区综合在线| 可以免费看av的网站| 黄片免费下载| 国产av乱轮av| 国产99精品| 色综合99久久久无码国产精品| 狠狠做深爱婷婷久久综合一区| 高清无码黄| 免费看一级毛片| 亚洲制服丝袜AV| 日韩欧美亚洲精品| 亚洲精品毛片| 99精品人人A片免费看| 免费激情网站| 91丨九色丨蝌蚪丰满| 国产aⅴ日本一区二区三区武则天| 日韩视频一区二区| 精品久久久久久久久久久久| 一区二区无码高清| 国产操骚逼啊啊啊| 污污内射在线观看一区二区少妇 | 国产欧美另类| 国产精品99精品久久免费| 国产精品无码一区二区桃花视频| 亚洲精品无人区| 日韩精品在线视频| 正文第1章初尝云雨| 亚洲欧美精品一区二区三区| 日本高清不卡视频| 欧美群妇大交群| 中文字幕视频一区| 欧美日韩一区二区在线观看| 久久久久久久亚洲精品| 欧美一区二区三区在线视频 | 国产视频一区二区在线播放| 国产精品日韩无码| 日韩免费专区| 操逼无码视频| 福利120无码| 亚洲免费观看视频| 91丝袜精品久久久久久无码人妻| 国产嫩苞又嫩又紧AV在线| 久久久黄片| 欧美高清一区二区| 亚洲永久无码7777kkkk| 黄色免费无码视频网站| 亚洲另类视频| 国产家庭性爱乱伦| 国产黄网站| 伊人色综合久久久| 天天干天天爽| 国产淫图AV| 日本爱爱视频| 久久99久久| 亚洲无码中文字幕在线| 啪啪啪一区二区| 欧美日本在线观看| 变态另类av| 午夜丰满极品美女A片| 国产一级特黄录像片| 国产一区无码| 91精品国产高清一区二区三蜜臀| av在线一区二区三区| 欧美少妇激情| 久久亚洲一区二区三区四区五区高| 少妇无套内谢久久久久| 一级黄色全裸性爱视频网址| 日本电影一区二区三区| 内射人妻少妇无码一本一道| 国产精品VIDEOSSEX久久发布| 免费午夜视频| 人人弄人人摸| 国产农村妇女精品一二区| 一区二区三区xxx| 亚洲中文字幕无码一区精品| 超碰伊人| 最新超碰| 综合天天色| 99久久亚洲精品日本无码| 狠狠狠狠狠狠狠狠操| 美女福利视频| 成人超碰| 久久九九免费观看网站| 日韩国产成人| 成人毛片网| 无码视频免费看| 97精品一区二区三区| 国产91丝袜在线播放九色| 亚洲熟女一区| 天天狠天天透| 91久久精品无码一区二区毛片进| 日韩有码在线观看| 天天干夜夜草| 久久久久国产精品免费免费搜索| 欧美视频中文字幕区| 人妻中文av| 三级在线播放| 熟女肥臀白浆大屁股一区二区| 免费不要钱的啪啪视频| 日韩三级免费观看| 中文字幕人妻熟女在线| 男女交性配视频全免费| 十八禁视频网站| 国产美女主播在线观看| 久久精品老司机| 国产精品日韩精品| 国产高清视频一区二区| 国产精品99久久久久久www| 欧美日韩V| aV在线无码| 亚洲iv一区二区三区| 超碰av在线| 性无码一区二区三区在线观看| 国产欧美一区二区三区不卡高清| 国产精品久久久久久久久久久久久四虎| 91人妻人人操| 成人免费性爱视频| 豪妇荡乳1一5潘金莲| 久久久久久伊人| 国产精品一级无码免费播放| 四虎啪啪视频| 黄aaaaaaaaaaaaaaaaaa色网站 | 欧美三级视频| 欧美一区二区丁香五月天激情| 三级国产精品| 一区二区三区精品在线| 亚洲国产精品久久久久久6q| 久久午夜夜伦鲁鲁一区二区| 蜜桃91丨九色丨蝌蚪91桃色| 9.1成人看片| 我跟闺蜜公交车被弄到高潮| 真实的和子乱拍视频| 91人妻人人澡人人爽人人精品| 日韩黄色一级片| 国产精品一二三产区m553小说| 日本www色视频| 亚洲无码精品在线播放| 午夜无码日韩| 色色色婷婷| 欧美电影一区二区三区| 一道本无码一区| 成人无码视频在线播放| 亚洲熟妇av无码无码久久凹凸| 色婷婷成人| 国产女人爽到高潮a毛片| 欧美日韩一区二区在线观看| 色婷婷一区二区三区四区成人网站| 三级片网站在线观看| 日韩欧美视频一区二区三区 | 亚洲天堂一区二区| 高清免费无码| 国产精品一区二区视频| av第一区| 亚州国产成人精品女人久久久| AV肉肉| AV合作在线导航| 亚洲精品成人网站| 日本东京热视频| 东京热伊人| 亚洲精品一区二区三区2023年最新| 一级AV电影| 91视频网址| 美女视频一区| 国产欧美日韩精品专区黑人| 日韩在线视频免费| a一级毛片| 国产女人18毛片水真多18精品| 午夜精品国产| 精品久久久久久久| 人人人人看人人干| 91这里只有精品| 国产91精品一区二区| 色婷婷一区二区| 久久岛国| 伊人久久大香线蕉| 国产96在线| 日韩超碰| 成人免费毛片| 久久久频| 婷婷久久综合| 韩国无码一区二区三区精品| 国产四区| 国产精品一级| 无码国产孕妇一区二区免费AV| 在线99视频| 中文字幕网址在线| 中文乱码字幕在线中文乱码| 精品婷婷| 午夜av在线播放| 亚洲免费在线视频| 一级黄色录像片| 在线观看AV免费| 91久久国产综合久久| 久草人妻| 国产a区| www99热| av无码在线播放| 国内精品写真在线观看| 小黄片在线免费观看| 91爱爱爱| 98年欧美综合性爱| 91精品无码少妇久久久久久网站| 亚洲精品成人网| 男女全黄做爰视频| 免费毛片一区二区三区久久久| 色婷婷五月天激情| 乱子轮熟睡1区| 国产又粗又黄视频| 国产成人无码区二区三区牛牛影视| 亚洲乱伦AV| 国产在线视频无码| 久久77| 欧美日韩国产高清| 欧美操逼视频| 亚洲有码在线| 制服丝袜综合| 亚洲精品成人| 精品国产亚洲AV麻豆| 福利一区二区视频| 在线观看欧美精品| 欧洲无码一区| 日韩欧美中文字幕在线观看 | AV手机天堂| 在线观看网站深夜免费| 97碰碰碰| 成人午夜福利| AV无码免费一区二区三区不卡| 91精品在线观看视频| 国产又粗又猛又黄| 亚洲av一二区| 人妻巨大乳一二三区| 91精品久久久久久粉嫩| 人人操人人草人人艹| 亚洲AV免费在线观看| 免费在线无码| 国产伦精品一区二区三区照片| 国产性爱免费| 91精品久久久久久粉嫩| 国产精品久久久久久久白丝制服 | 日本视频一区二区三区| 在线观看亚洲欧美| 女人高潮天天躁夜夜躁| 99精品久久毛片A片| 国产精品久久久久久久久久久久久四虎| 国产伦理一区二区| 懂色午夜精品久久久久久无码小说| 中文字幕精品在线| 欧美电影一区二区| 奶大灬好大灬好硬灬好爽在线播放| 一级黄片在线播放| 精品国产一区二区三区不卡蜜臂| 免费乱伦视频| 欧美偷伦无码一区二区| 丁香五月天在线| 亚洲国产精品毛片AV不卡下载| 亚洲乱码中文字幕久久孕妇黑人 | 国产草草影院CCYYCOM| 91精品无码久久久久久五月天| 免费视频成人| 亚洲国产精品无码| 伊人久久久久久久久久久久| 日韩无码观看| 中文字幕一区二区三区| 国产性爱在线观看| 4444亚洲人成无码网在线观看| 会蜜乳AV| 国产精品一区一区三区| 爱爱综合| 99无码| 久久99无码| 精品久久影院| 韩日在线视频| 91视频精品| 日本特黄视频| 久久性生活视频| 久久国产成人精品av| 欧美日韩视频| 乱淫视频| 精品久久久久久久久久久国产字幕| 黄污视频| 亚洲精品在线视频观看| 熟女无码高清裸体做爱| 99精品久久久久久人妻精品| 天天干夜夜操| 看一级黄色片| 日韩无码中字| 黄色操逼网站| 女人扒开屁股桶爽30分钟| 奶大灬好大灬好硬灬好爽在线播放| 免费观看国产精品| 成人久久久久| 在线免费看黄| 国产99久久| 美女福利视频| 超碰导航| 亚洲综合图片| 亚洲一级黄片| 高清一区无码| 亚洲午夜精品一区二区三区电影院| 日韩三级片免费观看| 亚洲无码一区二区在线观看| 国产熟女AAAAA片| 国产欧美日韩一区二区三区| 被男人疯狂揉吃奶胸视频 | 国产精品高清网站| 久久久精品欧美一区二区白云视色| 日本黄色A片| 中日韩一级片| 国产中文区三暮区2023| 国产色播| 3d动漫精品一区二区三区| 日韩无码性爱| 91精品久久人妻一区二区夜夜夜| AV久色| 婷婷伊人综合中文字幕| 国产又大又粗视频| 高清不卡一区二区| 国产好爽又高潮了毛片91| 99国产精品久久久久久久日本竹| 日逼视频免费看| 思思网站| 欧美视频中文字幕| 久久午夜无码鲁丝片午夜精品| 小说区 综合区 图片区| 日本天堂在线| 久久久久亚洲精品| 人妻99| 亚洲国产日韩三级av探花| 韩国一级a做片性全过程| 三级片中文字幕在线观看| 在线精品亚洲欧美日韩国产| 无码人妻束缚av又粗又大| 又大又粗又爽| 无套内谢波多野结衣| 麻豆精品无码国产在线| 免费人妻精品一区二区三区| 精品久久av| 日韩精品一| 色天使在线视频| 日韩国产欧美一区| 狼友精品| 久久精品99国产精| 国产熟女AV| 少妇高潮喷水惨叫久无码一区二区| 欧美插逼视频| 狠狠干天天操| 超碰人妻在线| 中文字幕天堂网| 激情综合网激情网络| 免费性爱视频| 久久综合九色欧美综合狠狠| 天天干天天拍| 大地资源中文在线观看官网免费| 国产女人性拳交| 国产在线精品一区二区| 中文字幕AV在线| 婷婷色视频| 青青久在线视频| 亚洲AV无码国产精品| 一区二区无码高清| 友田真希一区| 韩国三级bd高清中字2021| 欧美精产国品一二三区| 日本大学生三级三少妇| 国产无遮挡又黄又爽又色| 天天干天天干天天干| AV不卡在线| 国产精品av久久久| 天天日天天色天天干| 日韩毛片在线| 2020人人爱 人人摸| 日韩黄色录像| 无码av天堂| 国产精品日韩精品| 99久久99久久精品国产片果冰| 91在线免费看片| 无码精品人妻一二三区红粉影视| 日韩精品影院| 欧美美女操逼视频| 亚洲三级网| 国产精品福利网站| 91口爆吞精国产对白| 亚洲AV无码牛牛影视| 久久国产热视频| 婷婷伊人| 操之久久| 中文字幕欧美日韩| 自拍第1页| aV在线无码| 69堂在线| 日韩中文字幕区一区| 亚洲三级片网站| 天天日天天爱天天操| 亚洲美女毛片| 国产第一页屁屁影院| 国产一区在线免费| 欧美黄片免费| 国产一区二区三区精品视频| 懂色午夜精品久久久久久无码小说| 黄片一区二区三区| 国产伦精品一区二区三区四区免费| 国产性爱网| 女人扒开屁股桶爽30分钟| A级重口毛片拳交视频| 天天操网站| 亚洲一级黄片| 日韩精品成人小说网| 一本一道波多野结衣一区二区| 无码人妻日日拍夜夜奭| 日韩av电影在线观看| 无码一级| 成人写真福利网| 日韩在线免费播放| 国产一级理论片| 日韩综合在线| AV天天操| 丰满少妇一级A片免费| 久久精品二区| 亚洲人妻中文字幕| 欧洲另类类一二三四区| 久久久久无码国产精品Sm高潮| 午夜激情视频在线| 成人欧美一区二区三区白人| 精品日韩在线| 亚洲永久精品免费| 秋霞午夜福利视频| 午夜丰满极品美女A片| 国产一区2区| 亚洲视频不卡| 一起草无码在线| 国产成人综合| 午夜精品A片一二三区蜜臀| 午夜少妇| 天天日天天干天天操天天射| 成人性爱视频在线免费观看| 欧美v在线| 国产精品久久久久桃色TV| 色婷婷在线视频| 欧美色影院| 成人欧美一区二区三区| 91精品国产一区二区| 91无码人妻精品一区二区三区四| 黄片一区二区| 亚洲东京热| 久久久久久亚洲| 又爽又长又硬又大又粗又快| 毛片网站免费| 青娱乐极品视觉| 亚洲一区免费观看| 欧美午夜免费| 日韩无码P| JDAV视频在线观看免费| 国产精品人妻无码一区二区三区| 日韩毛片在线| 亚洲精品无| eeuss国产一区二区三区黑人| 伊人色色| 黄片在线免费观看| 亚洲Av无码午夜国产精品色软件| 东京热伊人| 国产大屁股喷水视频在线观看| 欧美一二三区| 国产成人精品久久久| 亚洲色久悠悠| 一级性爱毛片| 久久综合色视频| 国产精品国产三级国产专播品爱网| 热久久最新地址| 日韩av高清| 成人精品在线视频| 国产内射一区二区| 婷婷开心激情网| 色网站在线观看| 日韩无码成人| 国产无码精品电影| 色色91| 乱伦中文| 成人国产精品久久| 亚洲一级黄色| 精品天堂| 手机免费看av| 99r在线视频| 亚洲一本色道中文无码aV天美| 国产导航福利网| 秋霞久久| 国产精品色片| 国产A视频| 日日天天| 久久在线视频| 蜜桃久久| 欧美精品福利视频| 亚洲无码TV| 午夜成人福利视频| 在线观看第一页| 一级特黄妇女高潮视的特点| 91大片| 欧美国产日韩在线| 国产操片| 午夜av网| 人人爱人人操| 国内精品国产成人国产三级| 欧美操逼视频| 久久久久久99| 无码成人黄网站在线观看| 日韩精品人妻中文字幕在线| 亚洲天堂成人网站| 国产午夜激情| 精品久久电影| 欧美操逼精品| 丁香五月社区| 波多野结无码中文在线| 成人aaa| 变态另类视频一区二区三区| 亚洲精品一区杨思敏| 欧美在线观看视频| 日本91视频| 天天精品| 在线观看无码视频| 一级黄片免费看| 在线免费毛片| 一级av在线| 91精品视频国产| 美日韩一区二区三区| 无码人妻一区二区三区线| 国产精久久久久无码AV| 亚洲色狼网| 无码一级| 91KTV操逼视频| 中文字幕一区二区三区精华液| 潮喷在线| 国产干逼视频| 日韩欧美偷拍| 欧美成人无码A片免费一区澳门| 尤物网在线观看| 99国产精品99久久久久久粉嫩| 久久精品一区二区三区四区| 蜜桃91丨九色丨蝌蚪91桃色| 成人超碰| 岛国精品在线播放| 99精品免费久久久久久久久日本| 亚洲ⅴ国产v天堂a无码二区| 婷婷综合在线| 热久久免费视频| 亚洲三级在线| 国产精品爱久久久久久久威尼斯 | 精品99久久久久成人网站免费| 成人精品水蜜桃| 黄色91视频| 国产AV电影网| 妞干网视频| 欧美日精品| 亚洲AV成人无码久久精品| 国产成人久久| 日韩视频精品| 天天干夜夜艹| 碰碰人人| 成人网站免费观看| 一级二级三级黄片| 超碰免费人妻| 五月婷婷一区二区| 日韩黄网| 国产亲子伦视频一区二区三区| 91麻豆精品国产91久久久久久久久 | 五月婷婷六月丁香| 日本伊人网| 国产精品久久久久久久AV超碰| 亚洲a在线观看| 色六月婷婷| 精品人妻无码| 成人欧美一区二区三区黑人免费| 性无码一区二区三区| 欧美视频一区二区三区四区| 国产精品制服诱惑| 久99综合婷婷| 国产精品久久久一区二区| 乱伦av中文字幕| 岛国网站在线观看| 日本亚洲欧美| 亚洲免费成人网| 亚洲图片欧美日韩| 日韩无码免费电影| 国产无码高清视频在线观看| 亚洲AV综合色区无码另类小说| 黄色黄片免费看| 一级久久| 国产av色图| 欧美一区二区三区婷婷五月老人| 成人大片在线观看| www无码视频| 久久av无码| 一区二区高清无码| av在线视屏| 成人免费毛片| 美日韩一区二区三区 | 涩涩视频在线观看| 国产午夜一区二区| 亚洲Av无码一区二区三区在线播放| 精品久久久久久久久久久久| 日韩中文亚洲第一| 91久久国产| 无码做爰内谢免费视频| 久99久视频| 机长脔到她哭H粗话H| 天天舔天天干| 伊人网视频| 日逼视频xxxxxXxXX| 午夜福利国产| 波多野结衣网址| 天天躁日日躁狠狠躁av无码老牛| 少妇一夜三次一区二区| 免费日逼视频| 黄色一级视频免费观看| 欧美高清一区二区| 91av在线免费观看| www超碰| 久久91精品国产91久久跳| 日本不卡久久| 久久久影院| 亚洲一区二区视频在线观看| 女人扒开屁股桶爽30分钟| 日本韩国在线视频| 日韩精品一区二区三区在在线播放 | 波多野结衣网址| 亚洲人精品午夜射精日韩| 欧美人人操人人摸| aV在线无码| 99福利视频| 日韩中文在线观看| 91精品国产午夜福利在线观看| 日本午夜精品| 国产va精品免费观看| 国产精品久久久久久久久免费高清| 少妇一级淫片免费放| 尤物视频网站在线观看| 国产激情在线| 欧美精品高清| 91色逼资源| 无码任你操| 欧美日韩第一页| 亚洲精品第一页| 欧美日韩操逼| 亚洲九九九| 亚洲精品一区二区三区四区五区| 亚洲AV永久纯肉无码精品动漫| 亚洲无码少妇| 久久AV毛片| 91日日夜夜| 99久久国产视频| 91麻豆精品视频|