综合欧美一区二区三区,免费?Ⅴ中文字幕无码久久,人妻精品动漫H无码网站,岛国精品无码在线观看,亚洲一区二区日韩,欧美一区二区放荡人妇,无码人妻精品一区二区三区66,中文视频无码一区二区三区视频

2024

2024

  • Record 277 of

    Title:Adaptive Kalman Filter Based on Online ARW Estimation for Compensating Low-Frequency Error of MHD ARS
    Author Full Names:Su, Yunhao(1,2); Han, Junfeng(1); Ma, Caiwen(1); Wu, Jianming(3); Wang, Xuan(1); Zhu, Qinghua(3); Shen, Jie(3)
    Source Title:IEEE Transactions on Instrumentation and Measurement
    Language:English
    Document Type:Journal article (JA)
    Abstract:Magnetohydrodynamic angular rate sensor (MHD ARS) can precisely detect angular vibration information with a bandwidth of up to one kilohertz. However, due to secondary flow and viscous force, it experiences performance degradation when measuring low-frequency angular vibrations. This article presents an adaptive Kalman filter that uses online angular random walk (ARW) estimation to correct for the low-frequency error of MHD ARS, where a microelectromechanical system (MEMS) gyroscope is used to measure low-frequency vibrations. The proposed algorithm determines the signal frequency based on the ARW coefficients and adjusts the measurement noise covariance to achieve accurate fusion results. Thus, the method solves the problem of frequency-dependent variation of the amplitude response of the sensors in data fusion. Initially, the algorithm calculates the ARW coefficient recursively utilizing the measurement signals of both sensors. Then, the operational frequencies of both sensors are determined by analyzing the correlation between the ARW coefficient and frequency. Subsequently, in the Sage-Husa adaptive Kalman filter (SHAKF), the Kalman gain matrix is adjusted by modifying the measurement noise variances of both sensor signals individually. Moreover, the stability of the proposed algorithm is achieved by introducing an adaptive matrix to constrain the measurement noise covariance estimation. In the experiment, the fusion effects of single-frequency and mixed-frequency signals are tested separately. The experimental results show that for frequency variation and frequency mixing, the proposed algorithm in this study significantly improves the fusion results. ? 1963-2012 IEEE.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, The Photoelectric Tracking and Measurement Technology Laboratory, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) China Aerospace Science and Technology (CASC), Shanghai Academy of Spaceflight Technology, Shanghai; 200240, China
    Publication Year:2024
    Volume:73
    Start Page:1-10
    Article Number:9509510
    DOI Link:10.1109/TIM.2024.3375962
    數據庫ID(收錄號):20241515880340
  • Record 278 of

    Title:Study on the Flexible Support Structure of the Linear Moving Mirror of the Spaceborne Michelson Interferometer
    Author Full Names:Yang, Shuai(1,2); Sun, Jian(1); Yan, Qiangqiang(1); Y., Feng; F., Tian; X., Hao; C., Chang; J., Zhu; L., Wang; S., Yao
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:The support structure of the moving mirror constitutes the most crucial component of the high-precision Michelson interferometer,exerting a decisive impact on the quality of the interference signal. Conventional moving mirror support is accomplished through mechanical guide rails or magnetic levitation in combination with a drive motor,which is expensive,difficult to maintain,has a low life span,and has low guiding accuracy under the load of large mass and large stroke angle mirrors. To address these issues,a flexible support structure for the moving mirror of the Michelson interferometer is designed,featuring low cost,high precision,large load capacity,and large travel range. In this paper,the working principle of the Michelson interferometer is presented,and the impacts of the travel of the moving mirror,guiding accuracy,and velocity uniformity on the accuracy and stability of the interferometer are analyzed. The influence of the parasitic displacement perpendicular to the direction of motion on the parasitic path difference is quantified when the angle mirror is employed as the moving mirror. With the parallelogram guiding structure serving as the basic prototype,four parallelogram structures are nested both internally and externally to form the fundamental framework of the support structure,effectively amplifying the motion stroke of the entire structure. The flexible support structure is arranged symmetrically to counteract the parasitic displacement in the horizontal direction. Taking the load capacity,travel,and guiding accuracy of the flexible support structure as the optimization targets,the structural stiffness model is proposed. Based on the Awtar beam constraint model,the force-displacement relationship of the flexible reed with unilateral constraint is derived from the deformation mechanism of the cantilever beam,and subsequently,the stiffness formula of the flexible reed with unilateral constraint is deduced. The stiffness model of two unilateral constrained flexible reeds is obtained by means of Hooke's law. On this basis,the stiffness model of the entire flexible structure is derived in accordance with the series-parallel relationship of the flexible reeds in the flexible support structure. The finite element method combined with the stiffness model of the flexible structure is utilized to optimize the size parameters of the structure,and the transition fillet is set at the connection of the flexible reed and the rigid part to mitigate the stress concentration phenomenon. By comparing the ratios of yield strength to elastic modulus of different materials,7075 aluminum alloy is determined as the optimal material for the structure, and the three-dimensional model design and simulation of the flexible structure are conducted. The finite element analysis results indicate that the maximum tensile stress of the flexible structure amounts to 169 MPa,the structural safety margin is 1.98,and the parasitic displacement perpendicular to the movement direction is less than 4.1 μm when the travel attains 4.5 mm under the load of 1.5 kg(angle mirror). A special test platform was established by means of a spiral micrometer,a high-precision grating scale meter,a digital dynamometer,and weights. The force-displacement relationship and parasitic displacement of the test pieces were examined,and the errors between the simulation results and the experimental results were analyzed. The results demonstrate that the parasitic displacement perpendicular to the motion direction is less than 3.2 μm and 4.7 μm,and the root-mean-square error of straightness is 0.96 μm and 1.5 μm respectively when the flexible support structure is subjected to 0.5 kg and 1.5 kg load(angle mirror)within the range of 4.5 mm travel. The test results of this structure are consistent with the design results,and can meet the support requirements of the satellite-borne Michelson interferometer for high-precision linear moving mirrors. It can also be used in other motion systems that require large stroke,large load,long life,and high guiding accuracy. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) DFH Satellite Co.,Ltd, Beijing; 100094, China; (4) Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun; 130033, China
    Publication Year:2024
    Volume:53
    Issue:10
    Article Number:1022002
    DOI Link:10.3788/gzxb20245310.1022002
    數據庫ID(收錄號):20244717395144
  • Record 279 of

    Title:On-line measurement of COD and nitrate in water against stochastic background interference based on ultraviolet–visible spectroscopy and physics-informed multi-task learning
    Author Full Names:Liu, Jiacheng(1,2,3); Yu, Tao(1); Wang, Xueji(1); Liu, Xiao(1); Wu, Lichao(4); Liu, Hong(1); Zhao, Yubo(1,2); Zhou, Guangya(3); Yu, Weixing(1); Hu, Bingliang(1)
    Source Title:Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy
    Language:English
    Document Type:Journal article (JA)
    Abstract:Traditional ultraviolet–visible spectroscopic quantitative analytical methods face challenges in simultaneous and long-term accurate measurement of chemical oxygen demand (COD) and nitrate due to spectral overlap and the interference from stochastic background caused by turbidity and chromaticity in water. Addressing these limitations, a compact dual optical path spectrum detection sensor is introduced, and a novel ultraviolet–visible spectroscopic quantitative analysis model based on physics-informed multi-task learning (PI-MTL) is designed. Incorporating a physics-informed block, the PI-MTL model integrates pre-existing physical knowledge for enhanced feature extraction specific to each task. A multi-task loss wrapper strategy is also employed, facilitating comprehensive loss evaluation and adaptation to stochastic backgrounds. This novel approach significantly outperforms conventional models in COD and nitrate measurement under stochastic background interference, achieving impressive prediction R2 values of 0.941 for COD and 0.9575 for nitrate, while reducing root mean squared error (RMSE) by 60.89 % for COD and 77.3 % for nitrate in comparison to the conventional chemometric model partial least squares regression (PLSR), and by 30.59 % and 65.96 %, respectively, in comparison to a benchmark convolutional neural network (CNN) model. The promising results emphasize its potential as a spectroscopic instrument designed for online multi-parameter water quality monitoring against stochastic background interference, enabling long-term accurate measurement of COD and nitrate levels. ? 2024
    Affiliations:(1) Key Laboratory of Spectral Imaging Technology, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) Department of Mechanical Engineering, National University of Singapore, 117575, Singapore; (4) Radboud University, Nijmegen; 6525XZ, Netherlands
    Publication Year:2024
    Volume:323
    Article Number:124857
    DOI Link:10.1016/j.saa.2024.124857
    數據庫ID(收錄號):20243016765881
  • Record 280 of

    Title:A Novel Turbidity Compensation Method for Fluorescence Spectroscopy and Application in the Detection of Two Algae Species
    Author Full Names:Li, Ruizhuo(1,2); Dong, Jing(1,2); Wu, Guojun(1,3); Gao, Limin(1); Yang, Min(4)
    Source Title:SSRN
    Language:English
    Document Type:Preprint (PP)
    Abstract:Turbidity interference in measurements can reduce the accuracy of fluorescence detection. Conventional turbidity compensation methods directly establish the relationship between turbidity value and fluorescence but cannot accurately characterize the complex interference of turbidity on fluorescence detection. This paper introduces a novel turbidity compensation technique that separates the interference caused by turbidity particles into scattering enhancement and scattering-absorption attenuation components and corrects them separately. First, the scattering spectrum overlapping with fluorescence is estimated and subtracted from the actual sample spectrum to mitigate the fluorescence enhancement caused by scattering. Then, attenuation coefficients at different turbidity intervals are calculated to compensate for fluorescence attenuation. Finally, the two components are combined to obtain the final corrected result. Based on the proposed method, the fluorescence spectra data of Platymonas helgolandica var. tsingtaoensis and Synechococcus elongatus under different turbidity interferences were analyzed. Enhancement and attenuation coefficients based on turbidity values and scattering spectra were determined, ensuring adaptability to known and unknown turbidity conditions. The study results show that the fluorescence variation at different concentrations and turbidity levels are influenced by sample concentration and turbidity, exhibiting nonlinear behavior. The compensation model developed was applied to experimental data, achieving a mean relative error of less than 4% and a satisfactory root-mean-square error, significantly enhancing prediction accuracy. This method offers a straightforward and rapid application to detect a wide range of fluorescent substances. ? 2024, The Authors. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Science, Xi'An; 710119, China; (2) College of Photoelectricity, University of Chinese Academy of Science, Beijing; 100049, China; (3) Laoshan Laboratory, Qingdao; 266237, China; (4) North China Sea Marine Technical Center, Ministry of Natural Resources Qingdao, 266033, China
    Publication Year:2024
    DOI Link:10.2139/ssrn.4903055
    數據庫ID(收錄號):20240304540
  • Record 281 of

    Title:Static and structural dynamic analysis of thick panel kirigami deployable structures
    Author Full Names:Li, Junlan(1,2); Wang, Cheng(3); Yan, Yucheng(1,2); Wang, Peng(1,2); Zhao, Jieliang(4); Zhang, Dawei(1,2)
    Source Title:Aerospace Science and Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Thick panel origami and kirigami concepts have been wildly used to design novel deployable structures in various engineering applications. However, these novel folding methods usually involve complex connected topologies, which may lead to unclear and intricate characterized relationships between system properties and structural parameters, e.g., the position of cutting creases, design parameters and hinge stiffness arrangement, etc. In this paper, we propose theoretical models to describe the static and dynamic properties of thick panel kirigami structure in the fully deployed configuration. Firstly, the connected topology of the origami and kirigami structure is analysed, and the internal coupling topology of the structure is obtained. Based on the compliant matrix method, the static model of the structure is presented, and the different crease cutting modes of origami and kirigami arrays are discussed. Then, the motion modes of slight oscillation of structure are discussed and the structural dynamic model is obtained based on the Lagrange equation and validated by simulation. On this basis, the sensitivity analysis of the parameters is carried out, and the optimization model is given based on the comprehensive performance evaluation function. A physical prototype is optimized and tested, which indicates that our model is valid. This paper provides models for the structural static and dynamic properties of thick panel kirigami structures with complex connected topology, and the findings have a potential to be developed in other thick panel structures with origami and kirigami folding concepts. ? 2024
    Affiliations:(1) Key Laboratory of Mechanism and Equipment Design of Ministry of Education, Tianjin University, Tianjin; 300072, China; (2) School of Mechanical Engineering, Tianjin University, Tianjin; 300072, China; (3) Xi'an Institute of Optics and Precision Mechanics of CAS, Xi'an; 710119, China; (4) School of Mechanical Engineering, Beijing Institute of Technology, Beijing; 100081, China
    Publication Year:2024
    Volume:155
    Article Number:109753
    DOI Link:10.1016/j.ast.2024.109753
    數據庫ID(收錄號):20244817424131
  • Record 282 of

    Title:Laser-guided anisotropic etching for precision machining of micro-engineered glass components
    Author Full Names:Li, Jun(1); Zhong, Shuai(1); Huang, Jiaxu(1); Qiu, Pei(1); Wang, Pu(1,2); Li, Hui(1); Qin, Chu(3); Miao, Duo(1); Xu, Shaolin(1)
    Source Title:International Journal of Machine Tools and Manufacture
    Language:English
    Document Type:Journal article (JA)
    Abstract:Micro-engineered glass components play a vital role in various domains, but their full potential remains untapped due to the lack of easily accessible high-precision machining methods for customizable microstructure. Our discovery of a new phenomenon, where laser-modified regions break the rule of inherently isotropic glass etching and regulate a directional anisotropic etching along modified tracks, has led to the development of a laser-guided anisotropic etching (LGAE) method. This method enables crafting precision glass microstructures with sharp features, smooth surfaces, and adjustable shapes and sizes. An ultrafast Bessel beam is utilized to create high aspect-ratio line-shaped modification within the glass. With a higher etching rate than pristine glass, the modified line guides directional anisotropic etching along the modified track, facilitating the formation of a V-shape with an angle altered by the etching ratio. These modified lines can further serve as basic building blocks to interconnect to construct a 3D internal modification region and then guide the glass's overall surface morphology etching evolution, enabling the creation of microstructures featuring designable shapes and adjustable feature sizes. To accurately predict and control the shape of the microstructures, we establish a finite difference etching model that incorporates localized etching rate regulation, validating the robustness and controllability of LGAE. This scalable method has successfully fabricated a 50 μm period micro-pyramid array with high uniformity over a centimeter-scale area, demonstrating its suitability for large-scale manufacturing. The showcased micro-engineered glass components encompass V-groove arrays for fiber alignment, blazed gratings for light modulation, and microchannels with customized trajectories for microfluidic chips. These advancements driven by LGAE can significantly contribute to the progress of glass-based research and industries. ? 2024 Elsevier Ltd
    Affiliations:(1) Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen; 518055, China; (2) The Advanced Optical Instrument Research Department, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (3) School of Microelectronics, Southern University of Science and Technology, Shenzhen; 518055, China
    Publication Year:2024
    Volume:198
    Article Number:104152
    DOI Link:10.1016/j.ijmachtools.2024.104152
    數據庫ID(收錄號):20241515905919
  • Record 283 of

    Title:Performance improvement of a discrete dynode electron multiplication system through the optimization of secondary electron emitter and the adoption of double-grid dynode structure
    Author Full Names:Liu, Biye(1,2); Li, Jie(1); Chen, Song(3); Yang, Jishi(1); Hu, Wenbo(1); Tian, Jinshou(4); Wu, Shengli(1)
    Source Title:Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
    Language:English
    Document Type:Journal article (JA)
    Abstract:The discrete dynode electron multiplication system (DD-EMS) is the core part of commonly used photomultiplier tubes and electron multipliers, and it has a great influence on the signal amplification capability of these devices. In this work, the sputtering time of Mg target during the deposition of the surface MgO layer of the MgO/(MgO–Au)/Au multilayer film as the secondary electron emitter was optimized, and the strategy of double-grid structures applied at the 7th and 8th dynodes was proposed with the intention of improving the gain and stability of nine-stage DD-EMS under electron bombardment to satisfy the requirements of detecting the single photon or single charged particle. The investigation results show that the DD-EMS fabricated by using the MgO/(MgO–Au)/Au film with a Mg target's sputtering time of 3600 s has the highest maximal gain of 1.22 × 106 and the lowest gain attenuation rate of 15.7%/mC under electron bombardment. In addition, the DD-EMS with the double-grid structure has a higher maximal gain of 1.62 × 106 and a lower gain attenuation rate of 11.6%/mC under continuous electron bombardment, which are 32.8% increased and 17.7% reduced respectively in comparison with that of the single-grid structure. ? 2024 Elsevier B.V.
    Affiliations:(1) Key Laboratory for Physical Electronics and Devices of the Ministry of Education, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an; 710049, China; (2) Beijing Orient Institute of Measurement and Test, Beijing; 100086, China; (3) China Telecom Corporation Limited Beijing Research Institute, Beijing; 102209, China; (4) Key Laboratory of Ultra-fast Photoelectric Diagnostics Technology, Xi'an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:1062
    Article Number:169162
    DOI Link:10.1016/j.nima.2024.169162
    數據庫ID(收錄號):20240815578823
  • Record 284 of

    Title:Lightweight and optimized U-frame design for space-borne two-dimensional turntable
    Author Full Names:Wei, Yu-Xuan(1,2,3); Wang, Zhen-Yu(1,3); Li, Zhi-Guo(1,3); Huang, Le-Hong(1,2,3); Yang, Kai(1,2); Ma, Yu-Bao(1,2)
    Source Title:Chinese Optics
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Space-borne two-dimensional turntables are the main bearing mechanism of space cameras and other optoelectronic equipment, and the U-frame is the key supporting part of these turntables. In order to optimize the structure and lightweight design of the U-frame of the two-dimensional turntable and to develop a lightweight two-dimensional turntable with a high load-bearing ratio, we design a U-frame for the space two-dimensional turntable based on Carbon Fiber Reinforce Plastics (CFRP). First, a variable cross-section tubular structure U-frame was designed using carbon fiber composites instead of titanium alloy material considering the manufacturability. Then, according to the finite element modeling method based on the lay-up process, the carbon fiber U-frame was subjected to finite element modeling and simulation analysis. Then, a prototype U-frame was fabricated, and modal tests verified the accuracy of the finite element model. Finally, a three-level optimization method combining theoretical analysis, genetic algorithm, and the finite element method was proposed to optimize the design of carbon fiber U-frame ply angle, ply thickness, and ply sequence. The results indicate that the vibration patterns of the U-frame obtained from the modal test and simulation are identical and that the frequency difference is less than 5%. The initial design of the carbon fiber U-frame is 45.7% lighter than the titanium U-frame. Through the secondary optimization of the composite layup, the U-frame is further reduced in weight by 13.8%. Additionally, the intrinsic frequency of the U-frame is improved by 10.14%. It can be concluded that the composite modeling and optimization methods used in this paper are correct, and the designed carbon fiber U-frame meets the lightweight design requirements of space-born two-dimensional turntable. ? 2024 Editorial Office of Chinese Optics. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) Key Laboratory of Space Precision Measurement Technology, Chinese Academy of Sciences, Xi’an; 710119, China
    Publication Year:2024
    Volume:17
    Issue:4
    Start Page:896-908
    DOI Link:10.37188/CO.2023-0227
    數據庫ID(收錄號):20243116787564
  • Record 285 of

    Title:Analysis and simulation of the effect of large optical range difference of common path coherent-dispersion spectrometer on the detection of exoplanet radial velocities
    Author Full Names:Guan, Shouxin(1,2); Liu, Bin(1,2); Chen, Shasha(1); Wu, Yinhua(3); Wang, Feicheng(1,2); Wang, Shaofei(6); Liu, Xuebin(1); Wei, Ruyi(4,5,6)
    Source Title:Optics Communications
    Language:English
    Document Type:Journal article (JA)
    Abstract:The Exoplanet Explorer common-path coherent-dispersion spectrometer (CODES) utilizes a unique combination of an asymmetric common path Sagnac interferometer and a low to medium resolution spectrometer. The ideal optical range difference (OPD) interval for CODES is OPD ∈ {15.06 mm, 19.45 mm}; however, the OPD of CODES is 64.3 mm to achieve better detection accuracy. Though they will increase the accuracy of detection, large OPDs outside of the ideal interval will also reduce the contrast of the interference fringes, making phase changes more hazy. This may also significantly affect the radial velocity inversion and reduce CODES's instrumental accuracy. This study creates an inverse tone mapping operator based on the photographic model and designs an inverse tone mapping algorithm called CODESCE. The outcomes of the experiments demonstrate that the tone mapping algorithm CODESCE in this work is appropriate for enhancing the contrast of interference fringe images with high OPD, and it can enhance the contrast of interference fringes by three orders of magnitude when OPD = 64.3 mm; the processed interference fringes are located in the range of interference fringe curves of the optimal OPD. By comparison with other current approaches, the suggested algorithm yields superior processing outcomes. ? 2024
    Affiliations:(1) Key Laboratory of Spectral Imaging Technology CAS, Xi'an Institute of Optics and Precision Mechanic of Chinese Academy of Sciences, University of Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) School of Optoelectronics Engineering, Xi'an Technological University, Xi'an; 710021, China; (4) Hubei Luojia Laboratory, Wuhan; 430072, China; (5) Wuhan Institue of Quantum Technology, Wuhan; 430072, China; (6) School of Electronic Information, Wuhan University, Wuhan; 430072, China
    Publication Year:2024
    Volume:561
    Article Number:130443
    DOI Link:10.1016/j.optcom.2024.130443
    數據庫ID(收錄號):20241415840369
  • Record 286 of

    Title:Analysis of InGaAs/InP Single Photon Avalanche Diodes With Multiplication Width in Sub-Micron
    Author Full Names:Qiao, Kai(1,2,3); Chang, Yu(1); Xu, Zefang(1,3); Yin, Fei(1); Liu, Liyu(1,3); Wang, Jieying(1); Su, Chang(1,3); Xu, Linmeng(1,3); Fang, Mengyan(1,3); Liu, Chunliang(2); Tian, Jinshou(1); Wang, Xing(1)
    Source Title:IEEE Journal of Quantum Electronics
    Language:English
    Document Type:Journal article (JA)
    Abstract:InGaAs/InP single-photon avalanche photodiodes (SPADs) is capable of detecting single-photon in the near-infrared spectrum for applications such as quantum communication, fluorescence lifetime imaging, and Light detection and ranging(LIDAR). The effect of multiplication layer width on the performance of SPADs in both linear and Geiger mode have been theoretically studied. Three-types of InGaAs/InP planer SPADs with different multiplication width are fabricated and evaluated. The results of this study suggest that modifying the width of the multiplication layer can regulate the breakdown voltage, punch-through voltage, and dark current of the device. It is found that the measured time jitter is decreasing with the reduction of the width of the multiplication region. These characteristics can be used to optimize the temporal resolution of SPADs device. ? 1965-2012 IEEE.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Key Laboratory of Ultra-Fast Photoelectric Diagnostics Technology, Shaanxi, Xi'an; 710119, China; (2) Xi'an Jiaotong University, Key Laboratory for Physical Electronics and Devices of the Ministry of Education, School of Electronic Science and Engineering, Xi'an; 710049, China; (3) University of Chinese Academy of Sciences, Center of Materials Science and Optoelectronics Engineering, Beijing; 100049, China
    Publication Year:2024
    Volume:60
    Issue:4
    Start Page:1-7
    Article Number:4500107
    DOI Link:10.1109/JQE.2024.3399176
    數據庫ID(收錄號):20242016094811
  • Record 287 of

    Title:Multi-Grained and Confidence-Aware Multiple Instance Network for Infrared Target Detection
    Author Full Names:Chen, Weining(1,2,3); Yang, Hongtao(2); Chang, Sansan(2,3); Chen, Yunzhi(4); Wang, Xinlin(5); Chen, Yaohong(2,3)
    Source Title:IEEE Transactions on Geoscience and Remote Sensing
    Language:English
    Document Type:Journal article (JA)
    Abstract:Weakly supervised object detection (WSOD) methods that trains an object detection network using image-level labels has attracted much attention due to its cost-effective annotation and broad applied requirement. However, applying such weak label to detect targets in infrared images is not trivial due to the less discriminative target information and interference of complex backgrounds. This article proposes a multi-grained and confidence-aware multiple instance network (MCMIN) to detect infrared targets given the imprecise labels. The multiscale multi-grained feature extraction module is designed to capture discriminative features from different receptive fields for dim-small targets. The hierarchical multiple instance target detection module first applies L1-sparsity regularization to encourage the model generate reliable pseudo ground truth (GT), and then leverages the confidence-aware instance adaptive weighting strategy to refine proposals with particular emphasis, achieving more accurate target detection. The experimental results on two infrared target detection datasets illustrate that the proposed MCMIN outperforms other state-of-the-art WSOD methods with higher average precision (AP). The proposed approach decreases the false alarms. ? 1980-2012 IEEE.
    Affiliations:(1) Northwestern Polytechnical University, School of Automation, Xi'an; 710129, China; (2) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (3) Key Laboratory of Spacecraft Optical Imaging and Measurement Technology, Xi'an; 710119, China; (4) Hangzhou Vocational and Technical College, School of Electronic Information Engineering, Hangzhou; 310018, China; (5) Xidian University, Key Laboratory of Intelligent Perception and Image Understanding, Ministry of Education, School of Artificial Intelligence, Xi'an; 710071, China
    Publication Year:2024
    Volume:62
    Article Number:5005113
    DOI Link:10.1109/TGRS.2024.3422924
    數據庫ID(收錄號):20242816673755
  • Record 288 of

    Title:Analysis of Imaging Limit Capability for Natural Rendezvous of Low Earth Orbit Debris
    Author Full Names:Li, Yaru(1,2,3); Zhou, Liang(1,3); Liu, Zhaohui(1,3); She, Wenji(1,3); Cui, Kai(1,2,3)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:In order to achieve precise attitude monitoring of large-sized space debris,the spatial resolution of cameras is continuously improving. However,this improvement leads to an increasing blurring effect caused by relative motion during exposure time. It is particularly important to research on how to balance camera resolution and the issue of image blur caused by motion-induced displacement. For low earth orbit natural rendezvous imaging scenarios,changes in the camera's observational angle before and after the rendezvous lead to variations in the position and orientation of the target in the camera line of sight. The image motion generated as a result of this is referred to as intrinsic image motion in the natural rendezvous imaging scenario. This passage establishes the equation for the image plane position through the mapping relationship between the points of space target objects and their corresponding image points. The equation involves the transformation of coordinates in seven different coordinate systems. In theory,taking the derivative of this equation with respect to time yields the instantaneous velocity equation for image motion. However,due to the immense computational complexity of the matrix and numerous parameters involved (including the orbital parameters of the imaging platform and target,spatial resolution of the camera,exposure time,etc.),it is impractical to provide an exact expression for intrinsic image motion. Therefore,we obtain the image plane positions at different time points based on specific orbital and imaging parameters,calculate the intrinsic image motion within the exposure time,and then employ a data fitting method to obtain a model for the intrinsic image motion function. Through analyzing the relative radial velocity of the target with the camera and the displacement of the target along the optical axis at the rendezvous moment,it can be understood that the rotational image motion of the target around the optical axis is a primary factor in intrinsic image motion. Therefore,this intrinsic image motion is directly correlated with the relative rotational angular velocity between the target and the camera,exposure time,angular separation between the target and the camera,and the spatial resolution of the camera. Taking into consideration these influencing factors,this paper calculates the intrinsic image motion for specific imaging orbits and various influencing factors using the image plane position equation. The obtained data is utilized as a training set for fitting the intrinsic image motion function. The fitting correlation coefficient for the training set is 0.99,with a root mean square error of 0.12. Subsequently,intrinsic image motion calculated with different orbital parameters is used as a test set to validate the accuracy of the fitting function. The correlation coefficients for different independent variables are all greater than 0.9,and the root mean square error are all less than 0.2. This indicates that the fitting accuracy of the intrinsic image motion function is high,and the fitting results are reliable. The intrinsic image motion function model reveals that intrinsic image motion is linearly correlated with relative rotational angular velocity,exposure time,and the angular separation between the target and the camera. It is also exponentially correlated with the spatial resolution of the camera. This paper analyzes the impact of this image motion on the modulation transfer function. When the image motion is greater than 0.5 pixels, the modulation transfer function decreases by approximately 10%,failing to meet the overall system design requirements. Therefore,this paper takes an image displacement of 0.5 pixels as the maximum allowable displacement and establishes a constraint on the camera's spatial resolution at the time of natural intersection. This constraint illustrates the relationship between camera resolution and the relative angular velocity,exposure time,and angular separation between the target and the camera under the condition of satisfying the maximum allowable image motion. Taking a specific set of imaging orbits as an example,we demonstrate the method of calculating the maximum resolution of the camera at the rendezvous moment using this constraint condition. We point out that in low earth orbit rendezvous imaging scenarios,even if the spatial camera resolution exceeds this limit,there is no improvement in image quality. This indicates that the constraint condition has a significance for the design of imaging cameras and the selection of exposure parameters. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi′an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) Key Laboratory of Space Precision Measurement Technology, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:8
    Article Number:0811003
    DOI Link:10.3788/gzxb20245308.0811003
    數據庫ID(收錄號):20243917106310
毛片毛片毛片毛片| 香蕉在线影院| 国产一级无码片| 日韩在线不卡| 96久久精品A片一区二区| 五月天乱伦视频| 久久99国产精品黄毛片禁果| 国产真实精品久久二三区| 亚洲乱码毛片在线播放| 亚洲av播放| 色91精品久久久久久久久| 人妻超碰| 日本a免费| 国产精品久久久久久无码日本蜜乳| 无码av一本永久免费专区| 欧美三日本三级三级在线播放 | 国产精品―色哟哟| 久久Av一区二区| 自拍偷拍亚洲一区| 交视频在线播放| 天天看天天操| 欧美A∨无码国产精品久久粉色| 亚洲熟女久久| 99国产在线观看免费视频| 久久国产精品视频| 小黄片免费在线观看| 天天干网| 精品黄色片| 18资源在线wWW免费| 国产精品嫩草影院8Vv8| 国产一线二线在线观看| 亚洲无码一二三区| 成人片在线观看| 99无码超碰| 国产伦国产伦老熟300部| 久久亚洲国产精品无码一区| 色婷婷一区二区三区久久午夜成人| 在线观看亚洲欧美| 五月丁香伊人网| 日本三级视频| 一级毛片在线| 特黄AAAAAAAAA毛片免费视频| 欧美激情一区| 精品黑料一区二区三区| 日韩a在线| 久久中文精品| 守寡多年的妇岳给了我| 国产精品视频网| 91网站免费入口| 日韩无码一级片| 午夜精品久久99蜜桃的功能介绍| 国产成人精品一区二三区熟女在线 | 国产精品毛片无码一凶二凶三凶| 精产国产伦理一二三区| 三级性爱视频| 日韩无码| 日本久久精品| 日本高清视频一区二区三区 | www无码| 国产区在线观看| 人妻精品| 久久久久99人妻一区二区三区| 草榴在线视频| 亚洲精品国产suv一区| 乱伦综合网| 97久久精品| 国产毛片毛片精品天天看软件| 哇嘎| 久久永久视频| 91老熟女| 久久国产中文| 国产夫妻av| 亚洲AV永久无码精品视色影视| 欧美日韩视频| 97精品视频| 中文字幕一区二区久久人妻网站| 日韩欧美三级在线| 麻豆精品一区二区三区| 欧美性天天| 91popn.com在线生产| 国产主播99| 国产操比一区| 中文字幕无码在线观看视频| 国产精品久久久久久久久| 日韩无码视频一区| 少妇高潮毛片免费看欧美| 3p无码| 搡60一70老女人老妇女| 亚洲黄色网页| 午夜不卡视频| 特一级一性一交一视一频| 久久国产亚洲精品五月香婷 | 久久精品—区二区三区舞蹈 | 亚洲AV综合色区无码| 天天搡天天狠天干天啪啪| 欧美黄色一区| 影音先锋av天堂| 亚州AV一区二区三区| 调教 SM 重口 H文 HY| 国产AV毛片| 久久黄色电影网站| 日韩精品第一页| 欧美午夜视频在线观看| 日日嗨夜夜嗨一区二区| 亚洲欧美黄色片| 中文字幕第一区| 国产激情在线| 成人伊人网| 国产精品一区在线| 久久久黄色片| 国产精品一区在线播放| 欧美日韩在线看| 青青国产精品| 亚洲午夜久久久久久久久红桃| 激情丁香五月| 激情五月综合网| 91精品久久久久久综合五月天| 美日韩在线视频| 日韩精品一二三四区| 翔田千里性爱视频| 超碰97资源| 日韩欧美在线一区| 18禁网站免费| 日韩在线免费| 久久久精品一区| 二区免费视频| 色九月婷婷| 大香蕉一人在线| 国产操逼综合| 亚欧洲精品视频在线观看| 国产一级a毛免费大片| 欧美黄片| 国产在线拍揄自揄拍无码福利 | 日韩欧美精品一区| 岛国免费在线观看欧美| 成人四级无码片| 亚欧AV| 看毛片网址| 亚洲视频在线播放| 国产欧美精品| 欧美怡春院| 色一色操一操| 在线观看无码AV| 黄色在线网站| 黄色免费在线观看视频| 欧美三级网站| 日本无码成人片在线观看波多| 国产嫩苞又嫩又紧AV在线| 成av人片一区二区三区久久| 欧美视频| 亚洲性网| 久久精品视频免费| 日韩精品欧美在线| 国产精品无码在线播放| 精品不卡视频| 99在线播放| 国产v亚洲v天堂无码久久久91| 一级性视频| 日韩AV专区| 一级a一级a爰片免费免免中国人| 日韩怡红院| 一区二区三区无码按摩精电影| 红桃AV| 国产精品一区二| 高清无码在线观看视频| 懂色av色香蕉一区二区蜜桃| 一级亚洲| 日本激情在线观看| 性色AV一区二区三区| 久久国产一区二区三区高清视频| 国产精品免费在线| 成人网站在线播放| 8090操逼网| 91啪啪| 99热免费在线| 午夜精品视频在线观看| 精品久久久久久人妻无码中文字幕 | 大地资源二中文在线观看官网| 国产无套内射普通话对白天美传媒| 无码精品一区二区免费JIZZ| MM1313又粗又大受不了| 人人在操| xxxxx欧美| 无码免费一区二区三区电影| 国产三级91| 日韩三级片在线播放| 青青草精品在线| 国产精品亚洲精品| 91精品国产综合久久久久久| 国产免费乱伦视频| 国产好爽又高潮了毛片91| 黄色91视频| 国产精品免费观看视频| 国产精品久久久久无码AV绿帽男| 日本免费在线观看| 亚洲AV成人无码精电影在线| 久久五月天婷婷| 欧美在线精品一区二区三区| 亚洲AV无码国产精品| 美女黄片| 国产精品二区在线观看| 亚洲一级黄片| 欧美另类性爱| AV鲁丝一区鲁丝二区鲁丝三区| 中韩XXX抄逼| 国产另类视频| 一级毛片在线播放| 欧美精品区| 日本乱伦视频| 亚洲无码校园春色| 暗交老女一区二区三区| 女女百合av大片在线观看免费| 操人网站| 国产丝袜足交| 国产精品白浆一区二小说| 久久久精品国产| 精品av| 亚洲欧洲一区二区三区| 美女黄色免费网站| 欧美极品欧美精品欧美图片| 精品福利| 人妻饥渴偷公乱中文字幕| 日韩成人中文字幕| 天天爽天天干| 天天操网站| 天天躁日日躁狠狠躁| 国产午夜伦鲁鲁| 91网站在线播放| 免费看欧美黑人毛片| 久久精品视频在线观看| 日本高清久久| 中国美女一级毛片| 久久综合av| 国产在线精品免费aaa片| 国产a区| 日韩免费无码| 国产毛片在线看| 在线观看视频一区二区三区| 中文字幕精品一区二区三区精品 | 国产黄色大片| 国产精品观看| 国产免费黄色| 日韩精品无码一区二区三区久久久| 亚洲二区在线| 日本操逼视频| 久久国产精品影视| 熟妇一区| 性爱欧美第二区| 久去色| 国产无码免费视频| 欧美日韩免费在线观看| 国产一区二区精品久久| 国产乱论| 秋霞三级伦电影| 国产a区| 国产一区二区免费视频| 国产一级理论片| 性一交一免一费一视一频| 香蕉国产Av| 嫩草九九九精品乱码一二三| 欧美高清一级| 成人久久久| 亚洲性天堂| 国产伦精品一区二区三区视频免费| 国产伦精品一区二区三毛| 国产99久久久国产精品成人免费| 蜜乳无码中文字幕一区DⅤD| 人人操天天日| 国产精品一区二区三区在线免费观看| 精品无码专区| 婷婷伊人综合中文字幕| 三上悠亚中文字幕| 懂色Av噜噜一区二区三区AV| 91无码视频| 性生交大片免费看A| 玖玖在线资源| 一级特黄大片69| 一区二区亚洲| 日韩在线免费观看视频| 午夜久久久久久禁播电影| 高潮喷水波多野结衣在线观看| 国产草草视频| 亚洲熟妇AV乱码在线观看| 91久久久精品| 性爱导航综合| 国产一区二区三区精品视频| 日本色综合| 日韩精品在线视频| 亚洲精品色午夜无码专区日韩| 鲁鲁视频| 制服丝袜一区| 最新超碰| 九九久久99| 好看的操逼视频| 偷国产乱人伦偷精品视频| 日韩色视频| 精品人伦一区二区色婷婷| 欧美在线中文| 国产黄色在线观看| 欧美亚洲黄片| 岛国大片在线观看| 亚洲男人天堂视频| 欧美操逼视频| 日韩精品中文字幕视频| 制服诱惑一区二区三区| 无码精品久久| 免费黄色大片网站| 国产精品毛片一区二区在线看| 亚洲天堂黄色| 国产一级片视频| 98年欧美综合性爱| 无码AV资源| 97超碰护士| 99久久精品国产波多野结衣图片| 在线观看第一页| 污网站免费观看| 丁香五月天激情| 欧美午夜精品久久久久久浪潮| 四虎色播| 熟女乱伦视频| 性爱无码专区| 一二区无码| 欧美国产三级| 日韩抽插| 亚洲一区二区三区四区的 | 在线国v免费看| 乱熟女高潮一区二区在线| 亚洲Av永久无码精品国产精品| 国产欧美日韩一区二区三区| 青青国产精品视频| 亚洲视屏| 久久久黄色| 午夜精品视频在线观看| 中文字幕乱妇无码Av在线| 欧美日韩俄乌国产男女操逼逼视频| 理论片无码| 亚欧免费视频| 中文字幕丝袜| 中日韩一级片| 国产精品第1页| 内射在线| 制服丝袜在线视频| 乱伦精品| 午夜私人天堂| 久草视频在线播放| 久久九九视频| 欧美另类在线观看| 国产一区视频在线播放| 国产精品久久久久久久久无码消赢| 人人摸人人看| 评书三国演义袁阔成播讲365集| 福利姬在线观看| 2024AV天堂| 美女裸体无遮挡免费视频 | 久久精品成人| 日韩乱码一区二区三区| 99re视频在线| 日日狠狠久久| 波多野42部无码喷潮在线| 日韩欧美三级在线| 99久久久无码国产精品怎么下载| 婷婷五月综合激情| 99久久国产精品免费高潮| 午夜男人视频| 久久无码高清| 亚洲产国偷v产偷自拍网址| 久久综合色色| www亚洲午夜人美精片V区| 亚洲AV在线观看| 特一级黄色片| 日日爽夜夜爽| a视频在线| 国产性爱AV| 91在线中文字幕| 国产成人AV无码精品| 久久人人爽人人人人片| 蜜芽在线| 日韩欧美在线视频| 精品无码一区二区三区| 亚洲天堂AV网| 国产91精品一区二区| 中文人妻| 久久国产精品视频| 亚洲精品综合| 日韩欧美一级大片| 成人黄色在线视频| 性爱人人人人人人| 天天干夜夜一操| 国产精品无码不卡| 亚洲影视久久| 人妇视频一区二区| 日本操逼视频免费观看| 被男人疯狂揉吃奶胸视频| 国产三级片在线观看| 91精品久久久久久综合五月天| 精品国产99久久久久久宅男i| 中文字幕一区二区三区乱码在线| 99re在线观看| 国产成人精品在线观看| 青青青视频在线| AV手机天堂网| 欧美一区二区精品| 中文字幕一区二区在线观看| 亚洲精品一| 99精品视频一区二区三区| 日韩在线免费观看视频| 亚洲欧洲综合| 小白兔进化史| 久久久国产无码精品| 人人专区人人操人人| 激情动态视频| 三级片免费观看网址| 欧美高清一级| 女女女女BBBBBB毛片在线| 国产精品嫩草影院AV蜜臀| 日韩中文在线观看| 国产在线综合网站| 色欲av伊人久久大香线蕉影院| 久久99精品久久久久久琪琪| 亚洲三级片在线观看| 国产另类视频| 综合久久久| 欧美91视频| 久久国产香蕉| 99久久久无码国产精品免费了 | 国产嫩草一区二区三区在线观看| 国产毛多水多做爰爽爽爽| 亚洲天堂东京热| 精品二区在线观看| 国产天堂网| 国产激情综合五月久久| 国产性生活视频| 一本一道波多野结衣一区二区| 菠萝蜜视频在线观看| 久久黄色一级片| 欧美一区二| 亚洲av不卡| 国产麻豆剧传媒精品国产av| 久久精品免费电影| 18禁网站| 91人妻无码精品蜜桃| 精品国产精品三级精品AV网址| 91综合网| 拳交美女A片大全| 欧美日韩毛| 日韩一区无码| 亚洲精品v日韩精品| 色婷婷狠狠| 一级a一级a爰片免费免免免下载| 91精品久久久久久久久久| 99精品免费久久久久久久久日本| 久久午夜影院| 国产精品av久久久| 少妇高潮一区二区三区99小说| 国产高清无码视频在线观看 | 亚洲精品伊人| 久99综合婷婷| 国产一级a毛一级a做免费视频| 国产无码强奸视频| 午夜成人亚洲理伦片在线观看| 秋霞电影院午夜仑片| 天堂AV影视| 免费在线无码| 女同一区二区| 高潮毛片又色又爽免费| 日韩黄片免费在线观看| 国产嫩草一区二区三区在线观看| 综合激情久久| 久久久久无码精品国产电影| 一级毛片免费播放视频| 最新中文字幕av| 精品一区二区三区四区| 一级a一级a爱片免免费香蕉精品| 国产一级特黄AAA大片| 中文高清无码视频| 国产精品黄片| 无码一区在线播放| 国产视频网| 精品无码视频| 婷婷五月天影视| 18禁美女网站| 国产精品水| 国产在线成人| 国产精品免费一区二区三区在线观看| 在线观看免费黄片| 国产黄片久久| 黄网站无限看免费无码| 日韩无码精品电影| 国产精品视频网| 少妇导航福利| 一区二区三区免费观看| 欧美性爱免费在线观看| 中文字幕人成乱码熟女免费69| wwwav在线| 熟女91| 中国无码区| 国产精品一区二区在线| 婷婷五月天基地| 一级α片| 欧美在线观看视频| 亚洲国产精品久久久| 狠狠干成人| 亚洲无码精品在线| 国产精品无码一区二区毛片视频| 久久中文字幕av| 这里只有精品在线| 无码在线中文字幕| 女子初尝黑人巨嗷嗷叫| 成人性做爰aaa片免费| 99自拍视频| 日韩美女在线| 国产婷婷| 动漫av无码| 福利120无码| 天堂AV国产一区二区熟女人妻 | 五月丁香综合在线| 婷婷五月av| 超碰久操| 亚洲AV综合色区无码另类小说 | 五月天乱伦视频| 中文字幕亚洲精品| 国产一级精品视频| 在线免费黄片| 人人妻人人澡人人爽欧美一区双| 日日狠狠久久| 色九九九| 欧美一级内射美妇网站| 日韩国产成人| 精品人妻一区二区三区视频53一 | 欧美日韩精品久久久免费观看| 久久精品苍井空免费一区二| 一区在线看| 亚洲Av无码午夜国产精品色软件| 乱伦老女人一区二区| 91popny丨九色丨国产| 婷婷五月丁香五月| 91popny丨九色丨白丝| 精品婷婷| 狠狠操狠狠干| 亚洲免费在线| 久久夜色撩人精品国产小说| 日韩黄片小视频| 久久久婷婷五月亚洲国产精品| 五月婷婷在线视频| 久久成人视频| 国产精品女主播一区二区三区| 色婷婷精品久久二区二区蜜臂av| 国产精品国产三级国产三级人妇| 国产高清无码视频在线观看 | 国产婷婷色一区二区三区| 丁香五月天在线| 欧美国产不卡| 亚洲福利一区二区| 极品少妇XXXX精品少妇偷拍 | 杨幂一区二区三区免费看视频| 一本无色道高清码| 白嫩少妇激情无码| 免费无码国产www| 欧美性爱另类人妻| 中文字幕亚洲一区| 亚洲无码天堂| 91人妻人人澡人人爽人人爽| 国产精品久久久久桃色TV| 国产在线观看一区二区| 久久久黄色电影| 国产毛多水多做爰| 婷婷开心激情网| 欧美精品一卡二卡| 鲁鲁狠狠狠7777一区二区| 午夜精品无码91| 国产熟女AV| blacked精品一区国产99| 国产成人无码不卡精品久久久| 日韩精品一| 一区二区三区视频| 成人性爱免费视频| 中文字幕在线观看一区| 潮喷在线| 国产a精品| 丁香久久| 亚洲人午夜射精精品日韩| 九一免费视频| 免费黄色在线视频| 91福利导航| 波多野结衣网址| 天天干天天草| 91麻豆精品91久久久久同性| 尤物网址| 美女福利视频| 国产性爱AV| 91午夜福利电影| 免费99精品国产自在在线| 日韩三级片网站| 日日夜夜草| 一区二区三区亚洲| 午夜国产精品视频| 狠狠躁夜夜躁人人爽超碰女h| 性一级视频| 国产一区二区在线免费观看| 免费下载黄片| 亚洲第一久久| 久久久噜噜噜| 欧美少妇性爱| 国产成人一区二区| 国产精品| 99国产一区| 五月婷婷大香蕉| 91大神在线观看视频| 免费观看黄片| 人人操人人色| 亚洲在线视频| 黄色A一级狂操| 国产一区精品在线| 加勒比一区| 91麻豆精品秘密入口| 国产激情在线| 亚洲中文国产精品| 午夜不卡AV免费| 黄片应用下载| 国内精品久久久久久久影视4| 国产精品嫩草影院京东| 中国免费操逼的毛片| 亚洲色99| 国产精品人人做人人爽人人添| 精品国产亚洲AV| av一起看香蕉| 西欧毛片| 国产精品久久久久久一级毛片| 无码电影网| 青娱乐加勒比| 欧美日韩精品一区二区在线播放| 91精品久久久久久粉嫩| 激情综合在线| 日韩一级视频| 亚洲欧美日韩精品| 日韩久久精品| 在线观看的黄网| 久久久亚洲熟妇熟女| 亚洲欧洲自拍| 亚洲精品毛片| 日韩欧美黄色| 五月天婷婷在线播放| 天天色天天操天天| 中文字幕无码人妻| 亚洲一区二区三区| 国产性爱AV| 国产精品羞羞无码久久久| 国产操逼不卡视频| 国产韩国日本欧美的品牌suv| 乱伦精品| 国产在线小电影| 性爱一区二区三区| 老女人做爰全过程免费的视频| 人妻色视频| 天天爽天天爽| 中文字幕狠狠玩| 色天天综合| 一级日韩一级欧美| 秋霞一区| 黄网站在线观看| 安徽妇搡bbbb搡bbbb按摩| 久久精品视频一区二区| 大香蕉超碰| 久久久天堂| 婷婷五月天成人| 日韩无码一二三区| 狠狠干狠狠操天天爽| 亚洲人成色777777网站| av亚洲欧洲日产国码无码苍井空| 伊人超碰| 天堂久久精品| 毛片无码一区二区三区A片视频| 免费人成视频在线| 日本不卡视频| 黄色片黄色片好看好看好看的黄色片| 国产小视频在线| 91在线看视频| 韩国毛片| 99热最新| 国产激情视频在线| 亚洲制服丝袜| 国产综合一区无码| 热久久免费视频| 国产AV一卡二卡| 亚洲av无码天堂| 国产日韩欧美一区二区东京热| 精品无码国产一区二区久久久99| 精品无码一级毛片免费| 成人十区| 精品久久电影| 亚欧无码在线观看| 国产黄视频在线观看| 在线观看污视频| 美女网站免费黄| 日韩无码一区二区三区| 欧美日韩视频一区二区| 性史性农村dvd毛片| 青青草视频在线观看| 99精品自拍| 美女污污网站| 久操电影| 国产亚洲色婷婷久久99精品| 国产一级片子| 男人资源站| 99无码| 日韩一级高清| 91在线精品| jazzjazz国产精品麻豆| 亚洲欧洲天堂| 午夜爱爱毛片XXXX视频免费看| 精品在线免费观看| 亚洲国产精品无码久久久| 欧美a视频| 道日本一本草久| 国产乱码| 国产精品18久久久久久vr下载| 国产伦精品一区二区三区妓女下载| 亚洲免费人成视频| 91精品久久人妻一区二区夜夜夜| 日日天天| 国产福利在线观看| 蜜乳视频免费网站| 精品久久久久久久| 九色自拍| 女乱高潮久久久久久爽爽电影| 99国产精品免费视频观看8| 免费不卡av| 欧美成人a| 欧美日韩三级| 一级毛片一级毛片| 91在线视频观看| 97超碰人妻| 精品国产99久久久久久| 无码精品一区二区免费JIZZ| 亚欧无码| 综合无码| 国产性按摩╳╳╳╳女| 自拍第1页| 日本东京热视频| 亚洲精品强奸乱伦| 色无码视频| 国产精品久久久久久亚洲色| 一级毛片高清大全免费观看| 色综合色综合网色综合| 亚洲无码精品在线| 九色av| a视频在线| 欧美熟女一区| 天天日天天干天天操天天射| 99久精品| 成人黄色一级视频| 日本不卡久久| 99精品免费久久久久久久久日本| 久久精品香蕉| 亚洲国产精品久久无码中文字| 无码人妻精品一区二区中文| 欧美国产日韩在线| 黄网站免费在线观看| AV在线毛片| A片软件| 91精品一区二区三区在线观看| 男人天堂视频在线| 人妻在线中文字幕| 噜噜噜久久久| 久久综合久| 伊人网综合| 中文字幕一区二区三区四区五区| 国产精品一区二区三区四区| A级无遮挡超级高清-在线观看| 无码aaa| 人人狠狠| 欧美a视频在线观看| 久久精品99| 亚洲天天| 成人激情在线| 成人在线免费视频| 超碰999| 国产一区AV在线| A片看拳交| 国产一区二区三区四区视频| 91精品视频国产| 亚洲乱伦网站| 亚洲精品一区二区三区在线观看| 69无码| 亚洲精品视频在线播放| 日本特黄特色aaa大片免费| 一级黄片免费观看| 亚洲精品无码一区二区四区| 欧美老少交| 欧美交换国产一区内射| 人妖一区二区| 久久黄色片| 91天堂| 国产精品久久久久婷婷二区次| 九九热免费| 亚洲狠狠干| 日本免费一区二区三区| 国产家庭乱伦| 永久免费国产| 少妇的奶水| 国产一级二级三级视频| 成年免费视频黄网站在线观看| aaa无码| 久久AV秘一区二区三区| 操日本美女网站| 久久熟妇五十路一区| 日韩av电影在线观看| 天天草天天干| 91日韩视频| 丁香婷婷视频| 91亚洲国产| 国产美女毛片| 巨大巨粗巨长 黑人长吊| αⅴ天堂αⅴ| 欧美激情欧美激情在线五月 | 综合色天天| A片免费网站| 亚洲av无码一区二区二三区| 亚洲无吗| 中字幕人妻一区二区三区| 激情丁香花五月天按摩| 成人激情视频在线观看| 亚洲av无码天堂| 免费操逼视频| 久久人体| 少妇人妻真实偷人精品| 成人午夜福利视频| 人妻中文av| 五月天丁香网| 亚色在线| 亚洲一级黄色电影| 国产精品内射婷婷一级二| 国产真实老头老太BBWBBW | 欧洲av无码| 无码一区二区| 丁香五月天在线观看| 性无码专区| 国产精品多久久久久久情趣酒店| 国产欧美一区二区三区在线看蜜臂 | 黄色网址在线观看视频| 精品国产三级| 国产又黄又爽| 欧美日韩亚洲国产| 欧美日韩在线一区二区| 精品婷婷| 欧美国产三级| 免费国产网站| 嫩草影院在线免费观看| 欧美精品国产| 日韩无码P| 亚洲图片欧美日韩| 黄网在线| 日本婷婷久久久久久久久一区二区| 成全视频在线观看免费观看| www高清无码| 久久久成人网| 特级特黄AAAAAAAA片| 国产日韩三级| AV中文字幕在线| 在线观看中文国产探花| 青青操在线视频| 一级黄色片在线观察| 无码A片在线看www不卡福利姬| 免费无码国产在线54| 国产精品激情偷乱一区二区∴| 日本一区不卡| 日本无码熟妇五十路视频| 91黄色在线观看| 国产无码精品在线| 国洲 一区二区| 特黄特色60分钟免费| av一区在线| 91亚洲国产成人精品性色| 右手影院亚洲欧美| 日韩AV中文| 丁香五月天婷婷| 草视频黄在线| 亚洲乱色熟女一区二区三区| 婷婷第四色| 成人在线免费观看av| 性久久久久| 国产区精品视频| 日本a在线| 国产欧美日韩精品专区黑人| 久久京东热| 国产91丝袜在线熟女| 天天射天天日天天操| av第一福利导航| 丝袜乱伦视频| 国产美女裸体无遮挡免费视频| av天堂精品| 爽灬爽灬爽灬毛及A片| 人人爱人人摸| 疯狂操逼亚洲| 亚洲视频中文字幕| 午夜成人网站| 色噜噜狠狠一区| 向日葵视频在线观看| 欧美小黄片| 精品久久BBBBB精品人妻| 狠狠狠狠狠狠狠狠狠狠| 99无码人妻| 久久久久久影院| 免费高潮视频| 日本人妻HD| 日韩欧美在线观看| 国产熟女高潮一区二区三区| 国产韩国日本欧美的品牌suv| 国产家庭乱伦网址| AV无码免费| 小黄片在线| 欧美亚洲中文字幕| 日韩成人在线观看| 免费AV电影在线观看| 综合激情五月婷婷| 欧美BBB| 91无码人妻| 无码96| 91女子高潮白浆| 亚洲一区二区免费在线观看| 国产在线视频无码| 狠狠躁日日躁夜夜躁2022麻豆| 黄片AV在线| 熟妇无码乱子成人精品| 欧美性爱自拍视频| 日韩亚洲欧美在线| 大鸡巴网站| 女同性恋一区二区|